31
edits
Changes
Jump to navigation
Jump to search
Line 52:
Line 52: − + + +
→Workpiece Setup
=== Workpiece Setup ===
=== Workpiece Setup ===
* Clamp work to the surface with the toe clamps (in the black bag or clear plastic tub.)
* [//https://youtu.be/r6DCvtcU8_M Using blue painter's tape on the bed and underside of the part and bonding the two with superglue is an extremely effective workholding solution.]
** The superglue never touches the bed itself nor the work, just the tape.
* Clamp work to the surface with the toe clamps (in the drawer under the machine.)
** Toe clamps need to be pushing down - so that the toe is angled down towards the workpiece - not angled up.
** Toe clamps need to be pushing down - so that the toe is angled down towards the workpiece - not angled up.
** After setting the height with the toe's rear bolt, lightly finger-tighten the bolt near the piece.
** After setting the height with the toe's rear bolt, lightly finger-tighten the bolt near the piece.