Changes

* Safety

* Safety

**Safety Glasses

** Safety Glasses

**Hearing Protection

** Hearing Protection

* What can go wrong (and what to do)

* What can go wrong (and what to do)

* Daily Maintenance

* Daily Maintenance

** Spindle bearing warm up.

** Spindle bearing warm up.

*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

* Extended Maintenance

* Extended Maintenance

* Machine Control

* Machine Control

**Turn on sequence

** Turn on sequence

***Log into computer

*** Log into computer

***Turn on Shopbot big red and yellow twist switch

*** Turn on Shopbot big red and yellow twist switch

***Insert Key and turn to "engaged" position.

*** Insert Key and turn to "engaged" position.

***The VDF should light up, the spindle fan should be on.

*** The VDF should light up, the spindle fan should be on.

***Start "Shopbot 3" program.

*** Start "Shopbot 3" program.

**Jogging

** Jogging

***Keypad

*** Keypad

***Arrow Keys + Page Up, Page Down(ctrl for fast jog)

*** Arrow Keys + Page Up, Page Down(ctrl for fast jog)

   

   

* How to leave the machine (be excellent)

* How to leave the machine (be excellent)

** Machine

** Machine

***Turn off both switches

*** Turn off both switches

***Remove Key

*** Remove Key

***Remove bit and collet.

*** Remove bit and collet.

***Place both collet wrenches on top of electronics box

*** Place both collet wrenches on top of electronics box

***Remove all clamps

*** Remove all clamps

***Smooth out wasteboard if you puckered it at all.

*** Smooth out wasteboard if you puckered it at all.

   

   

** Post a picture please :-)

** Post a picture please :-)