Line 113: |
Line 113: |
| **The ShopBot computer does not have this and may not be fast enough to run it. | | **The ShopBot computer does not have this and may not be fast enough to run it. |
| **You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running! | | **You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running! |
− | **For '''Windows''', to install this on your local computer: | + | **For local '''Windows''', to install this on your local computer: |
| ***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts | | ***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts |
| ***Note that AppData is often a hidden folder! | | ***Note that AppData is often a hidden folder! |
| ***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts. | | ***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts. |
− | ***It is probably possible to put this on the Autodesk cloud and use it that way, but I don't know how. Help here would be appreciated.
| + | **For local '''Mac''' |
− | **For '''Mac''' | |
| *** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts | | *** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts |
| *** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source | | *** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source |