Changes

* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)

* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)

* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.  

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.  

*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts

*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts

*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source

*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source

**For '''Butt'''

**For '''Cloud'''

*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.

*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.

*** Double click the Assets > CAMPosts folder to enter it.

*** Double click the Assets > CAMPosts folder to enter it.

*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to my butt and allow you to access it anywhere you may login to your Fusion 360 account through My Butt Posts.

*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to the cloud and allow you to access it anywhere you may login to your Fusion 360 account through My Cloud Posts.

*** After enabling butt libraries in Fusion 360, you will be able to access your butt post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Butt Posts. Both of these dialog boxes are shown below. You will then be able to select my Butt post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).

*** After enabling cloud libraries in Fusion 360, you will be able to access your cloud post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Cloud Posts. Both of these dialog boxes are shown below. You will then be able to select the Cloud post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).

====Chip Load Calculation====

====Chip Load Calculation====

*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]

*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]

*[http://www.monstertool.com/monster_tool_calculators.html Monster Tools Chip Load Calculator]

*[https://www.monstertool.com/29/tech-data.htm Monster Tools Chip Load Calculator]

*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]

*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]

*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

|Mark Treiber

|Mark Treiber

|David Earl

|David Earl

|8/18/2018

|10/28/2018

|-

|-

|Charlie Kepner

|Charlie Kepner

|David Earl

|David Earl

|03/23/19

|03/23/19

|-

|-

|Fritz Sullivan

|Fritz Sullivan

|David Earl

|David Earl

|05/07/2019

|05/07/2019

|-}

|-}