833
edits
Changes
Jump to navigation
Jump to search
Line 407:
Line 407: + + +
no edit summary
I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports.
I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports.
== Resources ==
[[File:ShopBot PSOne Post Processors.zip|ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which include the change to check that the spindle actually started.
[[Category:Fabrication]]
[[Category:Fabrication]]
[[Category:CNC]]
[[Category:CNC]]
[[Category:Future Things Bus Data Sources]]
[[Category:Future Things Bus Data Sources]]