Difference between revisions of "Swag Heavy Duty Break"
Jump to navigation
Jump to search
Amishhammer (talk | contribs) |
Amishhammer (talk | contribs) |
||
Line 14: | Line 14: | ||
This tool is for use in the central machinery 20 ton H-Frame press. | This tool is for use in the central machinery 20 ton H-Frame press. | ||
− | There are 2 sets of dies, the standard dies and a set of | + | There are 2 sets of dies, the standard dies and a set of gooseneck dies. |
== Gooseneck dies == | == Gooseneck dies == |
Revision as of 14:53, 10 February 2016
File:None | |
Owner/Loaner | Tom Judge |
---|---|
Serial Number | N/A |
Make/Model | SWAG Offroad HD Break |
Arrival Date | Yes |
Usability | yes |
Contact | Tom Judge |
Where | Cold Metals Area |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $400 |
Host Area | {{{hostarea}}} |
This tool is for use in the central machinery 20 ton H-Frame press.
There are 2 sets of dies, the standard dies and a set of gooseneck dies.
Gooseneck dies
These dies are for bending shallow pans or forming complex "U" bends, please use the regular dies for all standard bends.
THE MAXIMUM THICKNESS OF MATERIAL TO BE BENT WITH THE GOOSENECK DIES IS 1/4"
Using the gooseneck dies you will be able to bend U shaped pieces that have maximum leg "A" that is 2.0" long and a minimum width "B" of 2.0" wide.
Authorized Users
Qualified Member | Trained By |
---|---|
Tom Judge | Owner |
Dean Anderson | Area Host |