388
edits
Changes
Jump to navigation
Jump to search
Line 62:
Line 62: + + + + +
Talk:Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 18:59, 8 August 2015
, 18:59, 8 August 2015→Origin and pointer: new section
This was Jason's take on things, but it seems reasoned. Note: once Elizabeth is replaced as the CNC host, read all mention of "Elizabeth" as "The Current CNC Host." --[[User:Rdoeksen|Rdoeksen]] ([[User talk:Rdoeksen|talk]]) 15:12, 3 July 2015 (CDT)
This was Jason's take on things, but it seems reasoned. Note: once Elizabeth is replaced as the CNC host, read all mention of "Elizabeth" as "The Current CNC Host." --[[User:Rdoeksen|Rdoeksen]] ([[User talk:Rdoeksen|talk]]) 15:12, 3 July 2015 (CDT)
== Origin and pointer ==
It seems that sometimes the home position gets misaligned and the laser pointer sits about a half inch down from the y ruler. Going in to adjust the x and y home positions (without changing numbers, currently (-326,+9))seems to have fixed the problem --[[User:Rtystgeeke|Rtystgeeke]] ([[User talk:Rtystgeeke|talk]]) 13:25, 23 July 2015 (CDT)
:What part of [[Epilog_30w_Mini_24_Laser_Engraver#Top_Eight]] is unclear? Please do not "adjust" anything. It took me 20 minutes to correct your "fix". The pointer does not always rest over the absolute or relative origin, however the machine ''will'' plot from that point. This is normal behavior. [[User:Jason|Jason]] ([[User talk:Jason|talk]]) 13:59, 8 August 2015 (CDT)