Domain Admins
598
edits
Changes
Jump to navigation
Jump to search
mLine 67:
Line 67: + + + + +
Talk:Epilog 30w Mini 24 Laser Engraver (view source)
Revision as of 14:03, 12 November 2015
, 14:03, 12 November 2015→Troubleshooting
It seems that sometimes the home position gets misaligned and the laser pointer sits about a half inch down from the y ruler. Going in to adjust the x and y home positions (without changing numbers, currently (-326,+9))seems to have fixed the problem --[[User:Rtystgeeke|Rtystgeeke]] ([[User talk:Rtystgeeke|talk]]) 13:25, 23 July 2015 (CDT)
It seems that sometimes the home position gets misaligned and the laser pointer sits about a half inch down from the y ruler. Going in to adjust the x and y home positions (without changing numbers, currently (-326,+9))seems to have fixed the problem --[[User:Rtystgeeke|Rtystgeeke]] ([[User talk:Rtystgeeke|talk]]) 13:25, 23 July 2015 (CDT)
:What part of [[Epilog_30w_Mini_24_Laser_Engraver#Top_Eight]] is unclear? Please do not "adjust" anything. It took me 20 minutes to correct your "fix". The pointer does not always rest over the absolute or relative origin, however the machine ''will'' plot from that point. This is normal behavior. [[User:Jason|Jason]] ([[User talk:Jason|talk]]) 13:59, 8 August 2015 (CDT)
:What part of [[Epilog_30w_Mini_24_Laser_Engraver#Top_Eight]] is unclear? Please do not "adjust" anything. It took me 20 minutes to correct your "fix". The pointer does not always rest over the absolute or relative origin, however the machine ''will'' plot from that point. This is normal behavior. [[User:Jason|Jason]] ([[User talk:Jason|talk]]) 13:59, 8 August 2015 (CDT)
::Perhaps I was hasty and you're not the reason the absolute origin was off by 20-30 thousands. Fixed in any event. [[User:Jason|Jason]] ([[User talk:Jason|talk]]) 14:01, 8 August 2015 (CDT)
== Troubleshooting ==
Shelle had some trouble sending print jobs, and there is a [https://groups.google.com/d/msg/pumping-station-one/XZNpsIC7JUs/9lKj7uYoEgAJ troubleshooting] thread on the mailing list. [[User:Skm|Skm]] ([[User talk:Skm|talk]]) 08:03, 12 November 2015 (CST)