Changes

You may want to use a leather glove and pliers while working near the heating unit.  

You may want to use a leather glove and pliers while working near the heating unit.  

The control unit has a Mypin controller two switched and a light. The left switch powers the controller. The controller must be on to enable the heating unit. The right switch and the controller power the heating unit. The left switch must be on (up) and the controller will turn on the heating unit until the SV temp is reached.  

The control unit has a Mypin controller with two switches and a light. The left switch powers the controller. The controller must be on to enable the heating unit. The right switch and the controller power the heating unit. The right switch must be on (up) and the controller will turn on the heating unit until the SV temp is reached.  

== Mypin Temp Controller ==

== Mypin Temp Controller ==

The temperature controller displays the current temperature of the heating element (PV) and the set value (SV). Both values are displayed in F. OUT1 = heating control, if on the heating element is on. AL = alarm1, currently set to 400 degrees F.  

The temperature controller displays the current temperature of the heating element (PV) and the set value (SV). Both values are displayed in F. OUT1 = heating control, if lit the heating element is on. AL = alarm1, currently set to 400 degrees F.  

To change the PV, Press the </AT key to select the digit you want to modify. Press ^ or v to modify digit. Press SET to confirm.

To change the SV, Press the </AT key to select the digit you want to modify. Press ^ or v to modify digit. Press SET to confirm.