833
edits
Changes
From Pumping Station One
Technics Hummer V Sputter Coater (view source)
Revision as of 04:13, 19 November 2013
, 04:13, 19 November 2013→Maintenance Log
|11/9/2013
|11/9/2013
|Ryan Pierce
|Ryan Pierce
|Replaced oil with high vacuum oil that came with the SEM. Note that Fitterdave changed out a gasket on the argon flow valve but it still has a leak as tested by a Ryan.
|Replaced oil with high vacuum oil that came with the SEM. Note that Fitterdave changed out a gasket on the argon flow meter, but it still has a leak as tested by Ryan. Also put panels back on.
|-
|-
|10/?/2013
|1?/?/2013
|Ryan Pierce
|Ryan Pierce
|Replaced HV power supply with one shipped from the manufacturer as a former refurb. New power supply works. A plasma can be maintained by adjusting gas pressure. It is definitely sputter coating. Also replaced power cord. (Note: it uses a standard extension cord. Borrowed one but it is a bit long.)
|Replaced HV power supply with one shipped from the manufacturer as a former refurb. New power supply works. A plasma can be maintained by adjusting gas pressure. It is definitely sputter coating. Also replaced power cord. (Note: it uses a standard extension cord. Borrowed one but it is a bit long.)
