Technics Hummer V Sputter Coater
Jump to navigation
Jump to search
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | HUV 62735 |
| Make/Model | Hummer V |
| Arrival Date | 3/23/2013 |
| Usability | yes |
| Contact | Ryan Pierce |
| Where | Across from Woodshop |
| Authorization Needed | yes |
| Hackable | NO |
| Estimated Value | $5,000.00 |
| Host Area | {{{hostarea}}} |
Configuration
- Standard sputter coater
- Carbon arc attachment for carbon deposition
Status
- Requires argon for operation.
- Gas flow rate meter has a small leak, needs a new gasket.
List of Currently Certified Users
| Qualified Member | Trained By |
|---|---|
| Ryan Pierce | Ryan Pierce |
Documentation
Manual scans for the sputter coater are available, as is a manual for a similar but not identical model of the carbon arc deposition system. A location to drop them is needed.
The manufacturer was purchased by Anatech USA and they still support this product.
Maintenance Log
| Date | Maintainer | Description |
|---|---|---|
| 7/21/2013 | Ryan Pierce | Tried using this after cleaning. Vacuum could only get down to 30-40 millitorr. The power supply seemed to need excessive amperage just to maintain a plasma, and that was with low voltage. Then something inside the power supply exploded with a burning smell. |
| 4/?/2013 | Steve Finkelman | Full cleaning of chamber. |