1,524
edits
Changes
From Pumping Station One
Tormach 1100 series CNC mill (view source)
Revision as of 17:37, 13 September 2018
, 17:37, 13 September 2018no edit summary
Needs a photo
Needs a photo
==Description==
==Description==
*https://wiki.pumpingstationone.org/CNC_Mill_Vote_2017
*https://wiki.pumpingstationone.org/CNC_Mill_Vote_2017
===PCNC 1100 Series 3 with accessories===
*Floor Footprint 61" x 53" x 78"
*Table Size 34” x 9.5”
*Machine Travel 18” x 9.5” x 16.25”
*5140RPM 1.5Hp spindle
*220V 20A, 3 phase power
== Status ==
== Status ==
Danger committee and volunteers have attended and others will be attending training sessions.
No scheduled authorizations yet. Fully functional, wired for power, and operable. Danger committee and volunteers have attended and others will be attending training sessions.
== Authorization ==
== Authorization ==
No authorization sessions at this time. If you want to become authorized or have experience with this machine, contact the CNC Area Host for guidance. To prepare yourself for Tormach authorization, some have recommended that you set yourself up for success by being fully authorized to use other Cold Metals and CNC-type tools, as there is much to know. You should be able to learn about feeds and speeds and tool selection by learning how to use the ShopBot CNC router and/or the Bridgeport milling machine. You can learn a great deal about the CAM aspect by training yourself up in Fusion 360's CAM mode. mHUB has two Tormach milling machines available to their members, with regular training sessions.
No authorization sessions at this time. If you want to become authorized or have experience with this machine, contact the CNC Area Host for guidance. To prepare yourself for Tormach authorization, some have recommended that you set yourself up for success by being fully authorized to use other Cold Metals and CNC-type tools, as there is much to know. You should be able to learn about feeds and speeds and tool selection by learning how to use the ShopBot CNC router and/or the Bridgeport milling machine. You can learn a great deal about the CAM aspect by training yourself up in Fusion 360's CAM mode. mHUB has two Tormach milling machines available to their members, with regular training sessions.
