Tormach 1300PL CNC Plasma Cutter
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | PA10064 |
| Make/Model | Tormach 1300PL |
| Arrival Date | December, 2022 |
| Usability | yes |
| Contact | Ron Olson |
| Where | Hot Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $20,000 |
| Host Area | Hot Metals |
Description
Will fill this in later. work area, capacities
Tormach 1300PL manual https://tormach.com/media/asset/u/m/um10720_1300pl_0722a_web.pdf
Hypertherm Powermax45 XP plasma cutter manual https://www.hypertherm.com/en-US/hypertherm/powermax/powermax45-xp/
Consumables
Tool Chains
work in progress Remote/cloud access. Pathpilot hub https://hub.pathpilot.com/about
Maintenance
(Shamelessly copied from page 58 in the manual)
Daily
- Clean the machine of any dust or abrasive particle buildup with a vacuum and brushes.
- Wipe dust off of the linear rails with a clean cloth.
Weekly
- Clean all exterior surfaces with a mild cleaner.
- Examine the water table's level and, if necessary, add water / rust inhibitor (GreenCut).
- Check your plasma torch consumables for wear and replace if needed.
Monthly
- Clean the electrical cabinet vents of dust with a clean cloth or compressed air.
- Remove the slats and clean sediment buildup from the bottom of the water table.
Semi-Annually
- Check drive belts for wear and re-tension if needed.
- Remove faceplate from torch lifter and clean lead screw with a lint-free cloth.
Status
1/3/23: Working great, getting ready for authorizations
12/9/22: Waiting on power for the plasma torch.