User:Mct/locker

no. 16

consumables

misc

fasteners

count	size	desc
1 box	#6, 1"	drywall screws
many	assorted	wood & drywall screws
4	1/4"	washer
2	1/4-20	socket screw
1	1/4-20	nut, Al

liquids

quantity	desc	state
3oz	WD-40	opened; with pipe
5g	super glue	opened

writing

implements

count	desc
1	king size sharpie
1	fine rollerball
3 (R, B, K)	thin permanent marker
1	mechanical pencil

paper

count	desc
1 sheaf	quad graph paper

wearable, &c

safety

count	desc	state
1 pair	safety glasses	no damage

cloth

count	desc	state
3	terry towel	new
1	terry towel	dirty
1 pair	socks	new
1 pair	socks	dirty

cutters

router

count	size	length	shank	flutes	desc	state
1	1/4"	1"	1/4"	2	carbide end mill	new
1	1/4"	1"	1/4"	2	carbide end mill	used

mill

count	size	length	shank	flutes	desc	state
1	1/2"	13/16"	1/2"	2	TiN coated HSS double end mill	new
1	1/2"	13/16"	1/2"	2	HSS double end mill	used
1	1/4"	1/2"	3/8"	2	HSS double end mill for Al	used

stock metal

bars

count	length	cross-section	material
1	6.5"	4cm x 4cm	6061 Al
1	4"	3/4" x 3"	6061 Al

tubes

count	length	cross-section	wall	material
1	8.25"	1.5" x 1.5" square	1/8"	6061 Al
1	6.25"	1.5" OD round	0.05"	6061 Al

misc

count	material	desc
several	street sweeper bristle	8" avg length; unrusted to rusty
1	6061 Al	small cuboid

tools

commercial

count	desc	state
1	0.2" edge finder	used
4 (nos. 6, 8, 10, 12)	drill & countersink combo bits	used
1	hex key for countersink bits	used
1	6", 150mm; 0.0005", 0.01mm calipers	used
1	carbide-tip scriber	used
1	10ft tape measure	used

improvised

count	desc	state
1	pen tube	used
1	1.5" OD, 1" brass cylinder	used
1	~12" acrylic straight edge	used