The Machine I have chosen to pursue is the MZ75 Power Hammer from Ken's Custom Iron. This is not a self contained unit meaning it will run off the air lines running through Hot Metals. This unit was chosen because it had one of the lowest air requirements for a non contained unit. The dies will be able to customize the easiest as they are bolted on disks which the blanks can be purchased for $25 each and the tooling attached how we see fit or need. I decided on a non contained unit to reduce the noise out put it would make during operation. This machine also has a small foot print of 24"x24"x81" as space in the shop is a concern. The MZ75 is one of the cheaper units, but still very durable and easy to maintain. | The Machine I have chosen to pursue is the MZ75 Power Hammer from Ken's Custom Iron. This is not a self contained unit meaning it will run off the air lines running through Hot Metals. This unit was chosen because it had one of the lowest air requirements for a non contained unit. The dies will be able to customize the easiest as they are bolted on disks which the blanks can be purchased for $25 each and the tooling attached how we see fit or need. I decided on a non contained unit to reduce the noise out put it would make during operation. This machine also has a small foot print of 24"x24"x81" as space in the shop is a concern. The MZ75 is one of the cheaper units, but still very durable and easy to maintain. |