Domain Admins
586
edits
Changes
From Pumping Station One
→Wood Working Machines that need collection
Initially, the dust collector will be turned on and off manually and the blast gates will be opened manually. After all the wood working machines are connected to the dust collector, we will work to automate the gates and collector motor - turning on a tool will activate the collector.
Initially, the dust collector will be turned on and off manually and the blast gates will be opened manually. After all the wood working machines are connected to the dust collector, we will work to automate the gates and collector motor - turning on a tool will activate the collector.
== Wood Working Machines that need collection ==
== Wood Working Machine Collection Strategies ==
* ShopBot Router
* ShopBot Router - A dust skirt with port is included with the machine. We will need to provide a flexible hose and support. Probably a transition from 6" down to the skirt port. Size of the port is unknown at this point.
* SawStop Table saw = Initially use 6" drop to a 6" to 4" tapered transition connected directly to the stock cabinet port. 3" duct to the blade guard. Consider this blade guard: http://www.thesharkguard.com/ Monitor result and increase the cabinet port size to 6" if required. Useful discussion on dust collection for the sawstop: http://lumberjocks.com/topics/33892
* SawStop Table saw = Initially use 6" drop to a 6" to 4" tapered transition connected directly to the stock cabinet port. 3" duct to the blade guard. Consider this blade guard: http://www.thesharkguard.com/ Monitor result and increase the cabinet port size to 6" if required. Useful discussion on dust collection for the sawstop: http://lumberjocks.com/topics/33892
* Jointer
* Jointer
* Mitre saw (needs a shroud built)
* Mitre saw = this tool throws a lot of dust at high speed and is one of the more difficult tools to collect dust effectively. Definitely needs a shroud.
* Delta 14" Bandsaw = Add a 4" port to a new lower door (this is Ed's saw and we don't want to permanently modify it). http://www.highlandwoodworking.com/bandsaw-dust-control-that-works-2.aspx
* Delta 14" Bandsaw = Add a 4" port to a new lower door (this is Ed's saw and we don't want to permanently modify it). http://www.highlandwoodworking.com/bandsaw-dust-control-that-works-2.aspx
* Belt/disk sander (probably needs a shroud for the belt, or just a better sander)
* Belt/disk sander (probably needs a shroud for the belt, or just a better sander)
* Planer (could probably use side shrouds)
* Planer (could probably use side shrouds)
* Wood lathe (needs a shroud)
* Wood lathe (needs a shroud)
* Drill press
* Drill press
