Changes

3 phase motor is 99 pounds.

3 phase motor is 99 pounds.

The collector is up and mounted. The joint between the blower housing and the cyclone needs to be caulked ( which may require dropping the cyclone a few inches).

The collector is up and mounted. The joint between the blower housing and the cyclone needs to be caulked ( which may require dropping the cyclone a few inches).

== Ducting ==

== Ducting ==

Order 6" flexible hose for shopbot.

Order 6" flexible hose for shopbot.

Upper table saw guard/collector from Shark Guard has a 4 month lead time. We need to find another supplier or fabricate one.

Upper table saw guard/collector from Shark Guard has a 4 month lead time. We need to find another supplier or fabricate one.

Buy or make a collector shoe for the shopbot. The shoe supplied with the shopbot has a very small inlet (3.5"?). It will probably work for the short term.

Buy or make a collector shoe for the shopbot. The shoe supplied with the shopbot has a very small inlet (3.5"?). It will probably work for the short term.

find 2 conductor cable and switches for the motor control. Power supply for the SSR (12-36v?).

find 2 conductor cable and switches for the motor control. Power supply for the SSR (12-36v?).

Install ducting. Duct order should arrive 7/10.

Install ducting. Duct order should arrive 7/10.

Make hoods for chopsaw and planer.

Make hoods for chopsaw and planer.