Line 3: |
Line 3: |
| |hostarea = CNC | | |hostarea = CNC |
| |authorization = yes | | |authorization = yes |
− | |hackable = no | + | |hackable = yes |
| |model = MODEL NUMBER | | |model = MODEL NUMBER |
| |serial = SERIAL NUMBER | | |serial = SERIAL NUMBER |
Line 9: |
Line 9: |
| |where = Lounge | | |where = Lounge |
| |doesitwork = no | | |doesitwork = no |
− | |contact = CNC Area Host --[[User:Rtystgeeke|Rtystgeeke]] ([[User talk:Rtystgeeke|talk]]) 18:53, 21 April 2016 (CDT) | + | |contact = CNC Area Host |
| |value = $35,000 | | |value = $35,000 |
| |image = "IMAGENAME.JPG" (case sensitive, this is whatever you named the image when you uploaded it) | | |image = "IMAGENAME.JPG" (case sensitive, this is whatever you named the image when you uploaded it) |
| }} | | }} |
| | | |
− | This is the page for the donated [http://www.zcorp.com/documents/900_9032-ZBuilderBroch6%20FINAL%20ENGLISH.pdf Z-Builder Ultra], currently in the lounge. The printer has some proprietary software and has an internal computer and interface as well as a networked desktop. This machine was originally manufacutred by Envisiontec, as an [ https://www.youtube.com/watch?v=Zp8eMEnBCE4 Envisiontec Ultra ]. | + | == STATUS == |
| + | |
| + | 9/13/17 This 3D printer is no longer found at the space. It's been scavenged and the unusable parts disposed of. |
| + | |
| + | This is the page for the donated [http://www.zcorp.com/documents/900_9032-ZBuilderBroch6%20FINAL%20ENGLISH.pdf Z-Builder Ultra], currently in the <strike>lounge.</strike> The printer has some proprietary software and has an internal computer and interface as well as a networked desktop. This machine was originally manufacutred by Envisiontec, as an [https://www.youtube.com/watch?v=Zp8eMEnBCE4 Envisiontec Ultra ]. |
| | | |
| The printer computer currently does not seem to boot or display any information from the touch screen monitor mounted on the front of the machine. | | The printer computer currently does not seem to boot or display any information from the touch screen monitor mounted on the front of the machine. |
Line 20: |
Line 24: |
| The desktop computer works and needs to be reformatted, and software reinstalled. | | The desktop computer works and needs to be reformatted, and software reinstalled. |
| | | |
− | Photos will be posted soon. | + | Photos will be posted soon. [https://pumpingstationone.org/2016/04/4797/ Here's a preview.] |
| + | |
| + | ==Hacks== |
| + | *<s>Replace the FEP membrane between the resin and top glass</s> |
| + | *Make a shallow resin tank or insert to reduce the volume needed to fill the machine or fill the tank with ballast blocks/bricks. |
| + | *Pick up one or more endstops in nanoDLP for more functionality |
| + | *Use the motor controller in the machine for z axis movement |
| + | *Take out the printer computer to see why it won't boot |
| | | |
| ==Resins== | | ==Resins== |
| *Need to be purchased. Our tank is currently about 14 liters. | | *Need to be purchased. Our tank is currently about 14 liters. |
− | *Bucktown polymers seems like a good resource - they donated a gallon to us. | + | *Bucktown polymers seems like a good resource - they donated a gallon to us, may need ventilation. |
| *Makerjuice also supplies a variety of resins. | | *Makerjuice also supplies a variety of resins. |
| | | |
Line 39: |
Line 50: |
| | | |
| ==Toolchain== | | ==Toolchain== |
− | Autodesk Fusion, Meshmixer, and Blender can create models | + | *Autodesk Fusion, Meshmixer, and Blender can create models |
− | Meshmixer can create supports | + | *Meshmixer can create supports |
− | Use [http://manual.slic3r.org/advanced/svg-output Slic3r] to output a sliced SVG. | + | *Use [http://manual.slic3r.org/advanced/svg-output Slic3r] to output a sliced SVG. |
− | A raspberry pi running [http://www.nanodlp.com/ nanoDLP] was able to move the z-axis and display calibration images from the projector. | + | *A raspberry pi running [http://www.nanodlp.com/ nanoDLP] was able to move the z-axis and display calibration images from the projector. |
| + | |
| + | Some thoughts: |
| + | *nanoDLP can also run a RepRap style controller board and may reduce jitter and speed fluctuations due to RPi GPIO |
| + | *The motor on the machine is a bi-polar stepper (NEMA 17) with a quadrature encoder that feeds into a controller board. That controller would be a useful component to salvage to ensure precise location of the platen. |
| | | |
| ==Specifications & Details== | | ==Specifications & Details== |
| *The projector in the printer is a: [http://www.projectorcentral.com/Dell-7700FullHD.htm Dell 7700FullHD] | | *The projector in the printer is a: [http://www.projectorcentral.com/Dell-7700FullHD.htm Dell 7700FullHD] |
− | *The stepper motor on the x-axis is a: | + | *The stepper motor on the z-axis is a: Sanmotion pbm423dxc60 |
− | *The motor driver in the machine is a: | + | *The motor driver in the machine is a: Sanmotion pb1d002p100 |
| *The motor driver we are using is a: A4998 | | *The motor driver we are using is a: A4998 |
− | *The lead screw on the x-axis is: ACME threaded rod. | + | *The lead screw on the z-axis is: ACME threaded rod. |