Epilog Laser settings
(Redirected from Laser settings)
Jump to navigation
Jump to search
Settings for various materials.
This data was generated using PS:One's Epilog 30w Mini 24. Please keep that in mind when using this information for other cutters.
| Material | Speed | Power | Frequency | |
|---|---|---|---|---|
| Cardstock (perforate) | 80 | 45 | 175 | |
| Corrugated Cardboard (cut) | 25 | 50 | 500 | |
| Corrugated Cardboard (etch) | 100 | 50 | ||
| 1/4" Aspen (cut) | 7 | 100 | 500 | |
| 1/4" mdf (cut) | 7 | 100 | 500 | |
| 1/8" birch plywood (cut) | 15 | 100 | 500 | |
| 1/4" Maple (cut) | 6 | 95 | 500 | |
| Maple (engrave) | 35 | 100 | ||
| 1/4" mirror back acrylic (cutting from back) | 10 | 100 | 5000 | |
| Cork (engrave) | 45 | 100 | ||
| 1/8" PETG (cut) make 3 passes | 35 | 100 | 500 | put wet newspaper on top to prevent charring |
| PETG (engrave) | 100 | 60 | ||
| Foamies (tm) 2mm sheet | 100 | 30 | 500 | |
| Acrylic (1mm engrave depth with crisp edges) | Regular settings for Acrylic and print 3 copies | |||
| Hardboard (Masonite) 1/8" (3mm) | 5 | 100 | 500 |
More power settings from NYCResistor (though theirs is a 35w model and ours is 30w)