Domain Admins
576
edits
Changes
Jump to navigation
Jump to search
Line 23:
Line 23: − +
Laser Cutter Instructions and Workflow (view source)
Revision as of 21:45, 5 November 2013
, 21:45, 5 November 2013→Configuring Laser Settings: Negate auto focus language.
* Click “Preferences”.
* Click “Preferences”.
* Choose the job type: “Raster”, “Vector”, or “Combined” based on if you are cutting, etching, or doing both. If you have a Raster or Combined job, set the resolution appropriately, but generally there’s no need to go above 600dpi.
* Choose the job type: “Raster”, “Vector”, or “Combined” based on if you are cutting, etching, or doing both. If you have a Raster or Combined job, set the resolution appropriately, but generally there’s no need to go above 600dpi.
* Enable Auto Focus (except in special occasions where the laser might collide with something or you are cutting/engraving an oddly shaped object).
* Do '''not''' enable Auto Focus.
* Set the piece size accordingly, or just set to 24” by 12” and set the art board within the vector application to 24” by 12” and then position the cutting/engraving image within the art board in).
* Set the piece size accordingly, or just set to 24” by 12” and set the art board within the vector application to 24” by 12” and then position the cutting/engraving image within the art board in).
* Raster settings (for engraving) are applied to strokes within the image that’s over a hairline (as defined above), while vector settings (for cutting) are applied to hairlines. If you have a combo image, you’ll have to set both. These settings depend on the material properties and thickness and there is a handy reference chart on the wall with commonly used materials.
* Raster settings (for engraving) are applied to strokes within the image that’s over a hairline (as defined above), while vector settings (for cutting) are applied to hairlines. If you have a combo image, you’ll have to set both. These settings depend on the material properties and thickness and there is a handy reference chart on the wall with commonly used materials.