Install the collector in the pallet rack behind the Shopbot. This will make the mounting of the motor easy and provide a framework for a sound enclosure, if it is necessary. The approximate dimensions of the rack are 44" wide x 33" deep x 9' tall.
+
Install the collector in the pallet rack behind the Shopbot. This will make the mounting of the motor easy and provide a framework for a sound enclosure, if it is necessary. The approximate dimensions of the rack are 44" wide x 33" deep x 9' tall.
−
Inlet port on dust collector is angled up at 11 degrees.
+
Inlet port on dust collector is angled up at 11 degrees.
To reduce turbulence in the collector, first 5 feet should be straight with no fittings.
To reduce turbulence in the collector, first 5 feet should be straight with no fittings.
Line 11:
Line 11:
Use SRD-35 or ASTN D3034 PVC or 24 gauge spiral duct or thicker.
Use SRD-35 or ASTN D3034 PVC or 24 gauge spiral duct or thicker.
−
Two 45 degree elbows has lower resistance than a single 90. Putting a short piece of straight pipe between the 45s is best.
+
Two 45 degree elbows has lower resistance than a single 90. Putting a short piece of straight pipe between the 45s is best.