3,430
edits
Changes
Jump to navigation
Jump to search
mLine 16:
Line 16: − + − + − ==PERSONAL PROTECTIVE EQUIPMENT== Line 24:
Line 23: − + − + Line 38:
Line 37: − + Line 44:
Line 43: − + − + − + Line 60:
Line 59: − + − + − + − |Matt Triano − |Danger Committee − |- − |Joeseph Nudell − |Danger Committee − |- − |Jason Shanfield − |Danger Committee − |- − |Michael Skilton − |Danger Committee − |- − |} − == Authorized Users== − {| class="wikitable" border="1" − ! Qualified Member − ! Authorized By − [[File:708352_man.pdf]] − − https://wiki.pumpingstationone.org/Wood_Lathe_Authorization_Checklist
When everything is important, nothing is important.
|itemphoto =
|itemphoto =
}}
}}
'''This tool requires authorization for use.'''
'''This tool requires certification for use.'''
==Authorization is by authorized proctors only==
== Personal Protective Equipment ==
* Face shield or safety glasses must be worn.
* Face shield or safety glasses must be worn.
* Do not wear gloves or loose clothing.
* Do not wear gloves or loose clothing.
* Remove watches,rings,and other jewelry.
* Remove watches,rings,and other jewelry.
* Don't wear long sleeves or roll them up.
* Don't wear or roll up long sleeves.
* Hearing protection may be required.
* Hearing protection may be required.
* Dust protection may be required.
* Dust protection may be required.
==PRE-OPERATIONAL SAFETY CHECKS==
== Pre-Operational Safety Checks ==
*Locate and ensure you are familiar with all machine operations and controls.
*Locate and ensure you are familiar with all machine operations and controls.
*Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty.
*Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty.
*Make sure all clamping handles are tight,
*Make sure all clamping handles are tight,
==OPERATIONAL SAFETY CHECKS==
== Operational Safety Checks ==
*Before making adjustments, switch off and bring the machine to a complete standstill.
*Before making adjustments, switch off and bring the machine to a complete standstill.
*Keep the tool rest adjusted close to the work and at the correct height.
*Keep the tool rest adjusted close to the work and at the correct height.
*Stop the lathe and remove all tool rests before sanding.
*Stop the lathe and remove all tool rests before sanding.
==ENDING OPERATIONS AND CLEANING UP==
== Ending Operations and Cleaning Up ==
*Switch off the machine when work completed.
*Switch off the machine when work completed.
*Return all chisels and other tools to racks.
*Return all chisels and other tools to racks.
*Leave the machine in a safe, clean and tidy state.
*Leave the machine in a safe, clean and tidy state.
==POTENTIAL HAZARDS AND INJURIES==
== Potentional Hazards and Injuries ==
*Eye injuries from flying debris or defective timber.
*Eye injuries from flying debris or defective timber.
*Hair/clothing getting caught in moving machine parts.
*Hair/clothing getting caught in moving machine parts.
*Airborne dust.
*Airborne dust.
==DO==
== Do ==
* Rough cut the workpiece as close as possible to the finished shape before installing it.
* Rough cut the workpiece as close as possible to the finished shape before installing it.
* Check your workpiece for flaws, cracks, knots etc.and test glue joints before mounting the workpiece on machine.
* Check your workpiece for flaws, cracks, knots etc.and test glue joints before mounting the workpiece on machine.
* Remove the tool rest before sanding or polishing.
* Remove the tool rest before sanding or polishing.
==DON'T==
== Don't ==
* Drive the workpiece into the drive center while the drive center is in the headstock.
* Drive the workpiece into the drive center while the drive center is in the headstock.
**Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock.
**Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock.
== Authorized Proctors ==
== List of Currently Certified Users ==
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Qualified Member
! Qualified Member
! Authorized By
! Trained By
|-
|-
|-
|-
|}
|}
==Documentation==
==Documentation==
[[Category:Woodworking]]
[[Category:Woodworking]]
[[Category:Shop Equipment]]
[[Category:Shop Equipment]]