Domain Admins
38
edits
Changes
From Pumping Station One
Created page with "# generated by Slic3r 0.9.9-dev on Sat Feb 23 23:30:57 2013 avoid_crossing_perimeters = 0 bed_size = 140,200 bed_temperature = 70 bottom_solid_layers = 3 bridge_fan_speed = 10..."
# generated by Slic3r 0.9.9-dev on Sat Feb 23 23:30:57 2013
avoid_crossing_perimeters = 0
bed_size = 140,200
bed_temperature = 70
bottom_solid_layers = 3
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 T0 S0 ; turn off temperature\nM104 T1 S0 ; turn off temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ; move bed to the front\nG28 X0 ; home X axis\nM84 ; disable motors
external_perimeter_speed = 100%
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 2.95
fill_angle = 45
fill_density = 0.3
fill_pattern = line
first_layer_bed_temperature = 75
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 30%
first_layer_temperature = 185
g0 = 0
gap_fill_speed = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_only_where_needed = 0
infill_speed = 80
layer_gcode =
layer_height = 0.3
max_fan_speed = 80
min_fan_speed = 30
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.5
only_retract_when_crossing_perimeters = 1
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 2
post_process =
print_center = 70,100
raft_layers = 0
randomize_start = 1
retract_before_travel = 2
retract_length = 1
retract_length_toolchange = 25
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 25
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 2
skirts = 2
slowdown_below_layer_time = 15
small_perimeter_speed = 45
solid_fill_pattern = rectilinear
solid_infill_below_area = 30
solid_infill_every_layers = 0
solid_infill_speed = 80
start_gcode = G28 ; home all axes\nM140 S70
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 45
temperature = 180
threads = 1
toolchange_gcode =
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 80
use_relative_e_distances = 0
vibration_limit = 0
z_offset = 0
avoid_crossing_perimeters = 0
bed_size = 140,200
bed_temperature = 70
bottom_solid_layers = 3
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 T0 S0 ; turn off temperature\nM104 T1 S0 ; turn off temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ; move bed to the front\nG28 X0 ; home X axis\nM84 ; disable motors
external_perimeter_speed = 100%
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 2.95
fill_angle = 45
fill_density = 0.3
fill_pattern = line
first_layer_bed_temperature = 75
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 30%
first_layer_temperature = 185
g0 = 0
gap_fill_speed = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_only_where_needed = 0
infill_speed = 80
layer_gcode =
layer_height = 0.3
max_fan_speed = 80
min_fan_speed = 30
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.5
only_retract_when_crossing_perimeters = 1
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 2
post_process =
print_center = 70,100
raft_layers = 0
randomize_start = 1
retract_before_travel = 2
retract_length = 1
retract_length_toolchange = 25
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 25
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 2
skirts = 2
slowdown_below_layer_time = 15
small_perimeter_speed = 45
solid_fill_pattern = rectilinear
solid_infill_below_area = 30
solid_infill_every_layers = 0
solid_infill_speed = 80
start_gcode = G28 ; home all axes\nM140 S70
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 45
temperature = 180
threads = 1
toolchange_gcode =
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 80
use_relative_e_distances = 0
vibration_limit = 0
z_offset = 0
