Line 10: |
Line 10: |
| == Background == | | == Background == |
| | | |
− | Dust collection in the shop can be improved to reduce down time, increase effectiveness and ease of use, and make it quieter. | + | Dust collection in the shop can be improved to reduce down time, increase effectiveness, reduce the noise, and make it easier to use. |
| | | |
| I suggest we do the following: | | I suggest we do the following: |
− | # Replace the two filters in the Clearvue cyclone filter stack. $165 each from Wynn. | + | # Replace the two filters in the Clearvue cyclone filter stack. The filter, Wynn 9B300NANO, is approximately $165 from Wynn. Using 4 filters instead of 2 may result in a significant flow improvement. This should be investigated. |
− | # Enclose the collector rack with an acoustic barrier. Add a muffler to the exhaust. | + | # Enclose the collector rack with an acoustic barrier such as quietrock (~$50/4x8 sheet). Add a muffler to the exhaust. |
− | # Automate the blast gates. When a machine is turned on, the blast gate (valve in the duct) will open and stay open for a few seconds. | + | # Automate the blast gates. When a machine is turned on, the blast gate (valve in the duct) will open and stay open for a few seconds after the machine is turned off. |
| # Replace the fine dust bin below the filter stack with a wood bin tall enough to support the stack without the orange bucket. The goals are to add dust holding capacity and support the stack more securely. | | # Replace the fine dust bin below the filter stack with a wood bin tall enough to support the stack without the orange bucket. The goals are to add dust holding capacity and support the stack more securely. |
| # Add more equipment to the collection system. The new bandsaw, jointer, router table and sanders should be added. | | # Add more equipment to the collection system. The new bandsaw, jointer, router table and sanders should be added. |
| # Add more dust collection capacity. The Clearvue system can support 2 or sometimes 3 simultaneously running machines. When the shop is busy, we exceed this. | | # Add more dust collection capacity. The Clearvue system can support 2 or sometimes 3 simultaneously running machines. When the shop is busy, we exceed this. |
| # Add overhead dust collection to the sawstop. This was in the original dust collection vote, but we didn't get it due to a long lead time on the part. http://www.thesharkguard.com/sharkdc.php | | # Add overhead dust collection to the sawstop. This was in the original dust collection vote, but we didn't get it due to a long lead time on the part. http://www.thesharkguard.com/sharkdc.php |
− | # Flow sensor to the duct and pressure sensors before and after the cyclone. | + | # Flow sensor to the duct and pressure sensors (manometer or electronic) before and after the cyclone. |
| # Bin level sensors for the cyclone bin and the filter stack bin. | | # Bin level sensors for the cyclone bin and the filter stack bin. |
| # Enclose the filter stack so we can apply a burst of pressure to clean the filter. | | # Enclose the filter stack so we can apply a burst of pressure to clean the filter. |
− | # Better filter/small cyclone for the Jet dust collector. | + | # Cartridge style filter and/or small cyclone for the Jet dust collector. |
| | | |
| == Language == | | == Language == |