Changes

The most likely source of problems would be for someone to leave the plastic under the heater for way too long and set it on fire. To help avoid this error, we are only using the center top panel for heating. '''Warning:''' Ignoring safety protocol is cause for revoking authorization.

The most likely source of problems would be for someone to leave the plastic under the heater for way too long and set it on fire. To help avoid this error, we are only using the center top panel for heating. '''Warning:''' Ignoring safety protocol is cause for revoking authorization.

Fumes from most plastics are not expected to be significant when the machine is used properly (''i.e.,'' nothing is on fire). If fumes do turn out to be a concern, the machine can be retrofitted with a fume hood. Then connected to the existing exhaust duct for the Forge. To improve air quality, turn on the forge exhaust and open the front by the plasma cutter.

Fumes from most plastics are not expected to be significant when the machine is used properly (''i.e.,'' nothing is on fire). If fumes do turn out to be a concern, the machine can be retrofitted with a fume hood. Then connected to the existing exhaust duct for the Forge. To improve air quality, turn on the forge exhaust and open the front door by the plasma cutter computer.