136
edits
Changes
Jump to navigation
Jump to search
Line 28:
Line 28: + + + +
Drill Press Craftsman 20in woodshop (view source)
Revision as of 11:41, 23 March 2020
, 11:41, 23 March 2020Added "Outside Resources" section.
* '''July 14, 2017.''' One of the two posts that adjusts the motor position is missing its nut. Also, there is a rack-and-pinion lever that moves the motor in and out, and one of the posts had skipped a tooth. I worked it back into position, and I believe it is now safe to use, despite the missing nut. Replacing the nut will require removing the motor, which is a two-person job.
* '''July 14, 2017.''' One of the two posts that adjusts the motor position is missing its nut. Also, there is a rack-and-pinion lever that moves the motor in and out, and one of the posts had skipped a tooth. I worked it back into position, and I believe it is now safe to use, despite the missing nut. Replacing the nut will require removing the motor, which is a two-person job.
* '''July 18, 2017.''' This is fixed now. For the record, the missing nut was M12-1.75. I put some "purple" locktite on both nuts, so hopefully we won't have to take it apart again.
* '''July 18, 2017.''' This is fixed now. For the record, the missing nut was M12-1.75. I put some "purple" locktite on both nuts, so hopefully we won't have to take it apart again.
== Outside Resources ==
[https://www.youtube.com/watch?v=Gq8jL_ZDjNM| Drill Press Basics] Solid video by <i>Wood Magazine</i>. Highly recommended.
== List of Currently Authorized Users ==
== List of Currently Authorized Users ==