Prusa i3 OctoPrint Server

From Pumping Station: One Wiki
Jump to: navigation, search


Prusa i3 OctoPrint Server
Prusa i3 OctoPrint Server.jpeg
Owner/Loaner PS:One
Serial Number N/A
Make/Model Raspberry Pi 3
Arrival Date April 2017
Usability yes
Contact CNC Area Host
Where CNC 1st Floor
Authorization Needed yes
Hackable no
Estimated Value $50
Host Area CNC


Prusa i3 OctoPrint Server Area: CNC https://wiki.pumpingstationone.org/Prusa_i3_OctoPrint_Server



IP Address

http://10.100.1.202/ is the left Prusa as of December 4, 2018

http://10.100.1.203/ is the "middle" Prusa as of December 4, 2018, and has a broken SD card reader. You must use Octoprint to print.

The Prusa on the top shelf is not yet provided with an Octoprint server, but you may still use SD cards to print.

Current Status

Offline.

Authorization

Authorization for this device is determined by authorization for the Prusa i3 3D printer.

Operation

Please see Prusa i3 3D printer#Prusa i3 OctoPrint Server

Recommended Non-Stock Plugins

  • Slicer (1.2.5)
    • A full-blown GUI-based slicer. Rotate and scale model; set layer height and other critical parameters.

See Also