Difference between revisions of "Epilog Laser settings"
Jump to navigation
Jump to search
m |
(+see also: NYCResistor's power settings) |
||
| Line 73: | Line 73: | ||
| Regular settings for Acrylic and print 3 copies | | Regular settings for Acrylic and print 3 copies | ||
|} | |} | ||
| + | |||
| + | [http://wiki.nycresistor.com/wiki/Laser_Power More power settings] from NYCResistor (though theirs is a 35w model and ours is 30w) | ||
Revision as of 15:14, 5 March 2014
Settings for various materials
| Material | Speed | Power | Frequency | |
|---|---|---|---|---|
| Cardstock (perforate) | 80 | 45 | 175 | |
| Corrugated Cardboard (cut) | 25 | 50 | 500 | |
| Corrugated Cardboard (etch) | 100 | 50 | ||
| 1/4" Aspen (cut) | 7 | 100 | 500 | |
| 1/4" mdf (cut) | 7 | 100 | 500 | |
| 1/8" birch plywood (cut) | 15 | 100 | 500 | |
| 1/4" Maple (cut) | 6 | 95 | 500 | |
| Maple (engrave) | 35 | 100 | ||
| 1/4" mirror back acrylic (cutting from back) | 10 | 100 | 5000 | |
| Cork (engrave) | 45 | 100 | ||
| 1/8" PETG (cut) make 3 passes | 35 | 100 | 500 | put wet newspaper on top to prevent charring |
| PETG (engrave) | 100 | 60 | ||
| Foamies (tm) 2mm sheet | 100 | 30 | 500 | |
| Acrylic (1mm engrave depth with crisp edges) | Regular settings for Acrylic and print 3 copies |
More power settings from NYCResistor (though theirs is a 35w model and ours is 30w)