Epilog Laser settings
Revision as of 22:46, 31 March 2017 by Daddybird (talk | contribs) (Daddybird moved page Laser settings to Epilog Laser settings: We now have two lasers, each with their own settings.)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Settings for various materials.
This data was generated using PS:One's Epilog 30w Mini 24. Please keep that in mind when using this information for other cutters.
Material | Speed | Power | Frequency | |
---|---|---|---|---|
Cardstock (perforate) | 80 | 45 | 175 | |
Corrugated Cardboard (cut) | 25 | 50 | 500 | |
Corrugated Cardboard (etch) | 100 | 50 | ||
1/4" Aspen (cut) | 7 | 100 | 500 | |
1/4" mdf (cut) | 7 | 100 | 500 | |
1/8" birch plywood (cut) | 15 | 100 | 500 | |
1/4" Maple (cut) | 6 | 95 | 500 | |
Maple (engrave) | 35 | 100 | ||
1/4" mirror back acrylic (cutting from back) | 10 | 100 | 5000 | |
Cork (engrave) | 45 | 100 | ||
1/8" PETG (cut) make 3 passes | 35 | 100 | 500 | put wet newspaper on top to prevent charring |
PETG (engrave) | 100 | 60 | ||
Foamies (tm) 2mm sheet | 100 | 30 | 500 | |
Acrylic (1mm engrave depth with crisp edges) | Regular settings for Acrylic and print 3 copies | |||
Hardboard (Masonite) 1/8" (3mm) | 5 | 100 | 500 |
More power settings from NYCResistor (though theirs is a 35w model and ours is 30w)