Difference between revisions of "Mitsui Surface Grinder"
Jump to navigation
Jump to search
(Creation, with repair tasks) |
(No difference)
|
Revision as of 20:43, 15 February 2017
This tool is currently broken, please contact the area host for more information. |
File:Mitsui250mh.jpg | |
Owner/Loaner | PS:One |
---|---|
Serial Number | {{{serial}}} |
Make/Model | Mitsui 250MH |
Arrival Date | Late 2016 |
Usability | so close |
Contact | Area Host (Dean Anderson) |
Where | Cold Metals |
Authorization Needed | yes |
Hackable | no |
Estimated Value | ~$3000 |
Host Area | {{{hostarea}}} |
Repair
All repair needs to be coordinated with the area host.
Motor bearings were replaced, to great success.
- Table ways need to be cleaned.
- Z ways need to be cleaned.
- Grinder needs to be placed in its final location, and then the table bearings replaced.
Diagnosis
After initial repair, diagnosis of further issues will come via a test grind.
- The table will need to be ground in.
- A mag chuck will need to be ground in.
- Five block test can be used as a quick diagnosis.