Provision ubuntu

From Pumping Station One
Revision as of 00:28, 18 March 2014 by Hef (talk | contribs) (Robot: Cosmetic changes)
Jump to navigation Jump to search

Proxmox

Log In

   https://10.100.200.51:8006/

Settings

Press the "Create VM" Button and use the following settings.

Section Name Value
General Name ${name}
OS Linux/Other Linux 3.X/2.6 Kernel (l26)
CD/DVD ISO image ubuntu-12.04.3-server-amd64.iso
Hard Disk Bus/Device VIRTIO
Hard Disk Bus/Device vm-storage-lvm
Hard Disk Cache Write Back
Network Network Model VirtIO (paravirtualized)

Double click the VM >> Hardware >> Display >> Standard VGA (std) The default works, but on my many monitors, the VNC client window is large enough that the terminal goes past the bottom of the monitor.

  • Press Start
  • Press Console

Installation

For the most part, defaults work. Pick a hostname that reflects what the machine is for.

Setting up Salt-Minion

   sudo apt-get install python-software-properties
   sudo add-apt-repository ppa:saltstack/salt
   sudo apt-get update
   sudo apt-get install salt-minion


edit /etc/salt/minion to include the line:

   master: bob.ad.pumpingstationone.org
   id: ${hostname}

Setting up the new machine on the salt-master

Shell into bob.ad.pumpingstationone.org, the salt-master, and run

   sudo salt-key -L
   sudo salt-key -a ${hostname}
   sudo salt '${hostname}' state.highstate

At this point, a reboot is a good idea. Salt has probably messed with the host and/or domain name settings, but not applied them. Samba get's a little confused when this information changes, but hasn't been understood system wide.


Back on the new box, run the following commands:

   sudo net ads join -U [email protected]

If you get a message about dns update failing, get the ip addresses and run the following commands on bob:

   samba-tool dns add bob ad.pumpingstationone.org ${hostname} A 10.100.1.x -k yes
   samba-tool dns add bob ad.pumpingstationone.org ${hostname} AAAA 2601::xx -k yes