Domain Admins
586
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − + − + − + Line 10:
Line 10: − + − 8 speed+ − Gear-head. No belts or Jacobs chuck to slip, which means there is a lot of torque.+ − + − + − + − + − + − − Spindle speeds (8) 84, ... + Line 36:
Line 35: − Work piece needs secure mounting due to spindle's high torque+ − − No through hole (table designed for coolant), must use vise − − No quill stop, must set table or head height to prevent drilling into table − − Don't force gear selectors, hand turn spindle as needed to align gears − − Gears reverse spindle, must turn power switch to appropriate side for correct spindle rotation direction − − Power switch has two speeds to each side − − Drill shanks must be firmly seated in taper − − To remove drill, lower spindle to expose the slot in the quill, turn the spindle by hand until the quill slot lines up with the spindle slot, insert the #3 drift into the slot with the curved edge facing up, grasp drill, tap drift with hammer + − Clean drill shanks+ − − Mill pocketed vise jaw flat − − More clamps matching table T-slots − − Improve sketchy quill return mechanism − − Adjustable quill stop − − Coolant system Line 79:
Line 55: − + − |- − |Tom Judd − |Dean Anderson − | − |- − | Todd Allen − | Dean Anderson − |9/15/2015 − | − |- − |Greg Kudlacz − |Todd Allen − |- − − |Dafe Hughes − |Todd Allen − |- − |Connor Sullivan − |Tom Judge − |1/22/16 − |- − |Abel Greenwald − |Michael Patton
no edit summary
{{Template:EquipmentPage
{{Template:EquipmentPage
|image = boice_crane.jpg
|image =
|owner=PS:One
|owner=PS:One
|model=Boice Crane 24103 24" Power Feed
|model=Rockwell 17-600 17" Drill Press
|arrived=January 2015
|arrived=December 2016
|serial=23649
|serial=1456658
|doesitwork=yes
|doesitwork=yes
|contact=Dean Anderson
|contact=Dean Anderson
|certification=yes
|certification=yes
|hackable=no
|hackable=no
|value=$600}}
|value=$500}}
== Specifications ==
== Specifications ==
17" capacity (from the center of the spindle to the column).
VFD controlled 3 phase motor. Continuously variable spindle speed from 250-??.
Morse #3 taper spindle
Morse #2 taper spindle
Capacity, cast iron 1 1/4"
Capacity, mild steel 1/2"
Drills to center 23"
Drills to center 17"
approximate weight 600 pounds
approximate weight ?? pounds
motor HP 1.5 (high) 1.2 (low)
motor HP 1
== Auth/Use Notes ==
== Auth/Use Notes ==
Only use drills and accessories with correct shank taper and tang
Only use drills and accessories with correct shank taper and tang
== To-Do ==
== To-Do ==
== Maintenance ==
== Maintenance ==
|-
|-
|Dean Anderson
|Dean Anderson
|Machine Shop Host Cred
|
|
|
|-
|-
|Everett Wilson
|Everett Wilson
|Dean Anderson
|Dean Anderson
|-
|-
|Bruce Mace
|Bruce Mace