# Make sure the burner valves are completely closed!!
# Make sure the burner valves are completely closed!!
# Turn on the valve for the propane tank
# Turn on the valve for the propane tank
−
# Adjust the pressure regulator on the tank to 10PSI. - If the pressure is to high you will have to open a burner valve slightly to let some pressure out.
+
# Adjust the pressure regulator on the tank to 10PSI. - If the pressure is too high you will have to open a burner valve slightly to let some pressure out.
# Place a lit piece of paper into the forge
# Place a lit piece of paper into the forge
# Making sure the paper is still alight, slightly open the valve for the front burner and allow the forge to light
# Making sure the paper is still alight, slightly open the valve for the front burner and allow the forge to light
Line 40:
Line 40:
# If you require the second burner open the valve for the rear burner 1/8th of a turn and allow it to light
# If you require the second burner open the valve for the rear burner 1/8th of a turn and allow it to light
# Adjust the valve to get a constant flame as you did for the first
# Adjust the valve to get a constant flame as you did for the first