SawStop table saw
From Pumping Station One
This tool is currently broken, please contact the area host for more information. |
Owner/Loaner | PS:One |
---|---|
Serial Number | NA |
Make/Model | 3.0HP 220V |
Arrival Date | 9/1/2012 |
Usability | WORKING |
Contact | Adrianna McKinley |
Where | Woodshop |
Authorization Needed | yes |
Hackable | NO |
Estimated Value | $3,000.00 |
Host Area | {{{hostarea}}} |
Rules
- Do not move the machine ever.
- Never use the table as a work surface.
- Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw.
- Always check your material on the blade before you spin up the blade. If the light turns red, DO NOT CUT.
- Always check your wood for nails or staples. If you're not sure, check the entire piece with a magnet.
- If you break something, or damage the saw, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool.
- Always dust the entire machine when you are done. Also check the motor compartment after every use and vacuum out as needed.
Notes
- There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut).
- The right hand table adjusting screw was bent while aligning the table. The table was aligned without it. Aligning the arbor tilt axis will be *really tough* without a replacement. (Part #11 in the cabinet and table exploded diagram in the manual p98)
- The rear rip fence rail has places to put 4 countersunk allen bolts. The left hand bolt screwed into the main table was too long and made contact with an internal table part (probably the rear trunion). It probably pushed the table out of alignment and caused binding while re-aligning the table. That bolt was left out. Don't replace it!
This tool may require training to be used correctly.
Training Resources
Links:
List of Currently Certified Users
Qualified Member | Trained By |
---|---|
Shawn Blaszak | Danger Committee |
Dan Meyer | Sean Blaszak |
Jacob Ginsburg | Shawn Blaszak |
Eric Stein | Steve Finkelman / Danger Committee |
Dee Newcum | Shawn Blaszak |
Ryan Pierce | Shawn Blaszak |
Tucker Tomlinson | Shawn Blaszak |
Adrianna McKinley | Danger Committee |
Anthony Barker | Adrianna McKinley |
Avner Shanan | Adrianna McKinley |
Colin Parsons | Adrianna McKinley |
Dan Denby | Adrianna McKinley |
Dillon Gray | Adrianna McKinley |
Douglas Savitsky | Adrianna McKinley |
Hailey Willis | Adrianna McKinley |
Jeremy Bloyd-Peshkin | Adrianna McKinley |
Jeremy Kay | Adrianna McKinley |
Jessica Cobb | Adrianna McKinley |
Jordan Bunker | Adrianna McKinley |
Kori Rays | Adrianna McKinley |
Patrick Callahan | Adrianna McKinley |
Ryan Brandys | Adrianna McKinley |
Shawn Blaszak | Adrianna McKinley |
Steve Farkas | Adrianna McKinley |
Steve Finkleman | Adrianna McKinley |
Mike Warot | Adrianna McKinley |
Eric Stein/Toba | Adrianna McKinley |
Ryan Pierce | Adrianna McKinley |
Tim Saylor | Ryan Pierce |