FormLabs Form 1+ SLA 3D Printer
Owner/Loaner | PS:One |
---|---|
Serial Number | SERIAL NUMBER |
Make/Model | FormLabs Form 1+ SLA 3D Printer |
Arrival Date | June 2017 |
Usability | yes |
Contact | CNC Area Host |
Where | CNC Shop |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $2,000 |
Host Area | CNC |
About
3D SLA Printer
Status
- Mail limitation to new users: both the tank and the resin are considered consumables, that you must provide for yourself. "One standard tank lasts for about 2 L of our resin. With a separate tank for each individual resin color, switching materials is as easy as sliding in a new tank."
- Each tank is (in 2018) $59 and each build platform is $99 https://formlabs.com/store/us/form-1/buy-accessories/
- White resin, the most common type, is about $149 per liter. https://formlabs.com/store/us/form-1/buy-materials/
Authorizations
- Power-On & Safety Check
Settings
Procedures
Powering On Machine
Powering Off Machine
Material Safety & Information
Resources
- Support link: https://support.formlabs.com/hc/en-us/categories/115000003004-Form-1-
- Each tank is (in 2018) $59 and each build platform is $99 https://formlabs.com/store/us/form-1/buy-accessories/
- White resin, the most common type, is about $149 per liter. https://formlabs.com/store/us/form-1/buy-materials/
Youtube Channels
Following are a couple good YouTube Channels with lots of information on the software and machine
Cleaning & Maintenance
List of Currently Certified Users
Qualified Member | Trained By |
---|---|
Andrew Camardella | Danger Committee |
Kathryn Born | Danger Committee |
Aaron Feigan | Danger Committee |
Ashish Jasani | Danger Committee |
Anna Yu | Danger Committee |