Dyna Kiln N100
File:"DynaKilnOverall.jpg" | |
Owner/Loaner | "PS:One" or link to user page of contact person |
---|---|
Serial Number | 62356 |
Make/Model | N100 |
Arrival Date | ?? |
Usability | "yes" |
Contact | Link to user page of contact person |
Where | Small Metals |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $999 |
Host Area | Small Metals |
Kiln
https://en.wikipedia.org/wiki/Kiln
This particular kiln is currently located in the small metals area by the fume hood and induction furnaces.
Manual Firing
plugging it in
Loading
Cones - http://media.wix.com/ugd/0c3047_80f20b4c30874c07b971f1b61ac16a03.pdf Cone Chart - http://media.wix.com/ugd/0c3047_48ee6a1c288c4b1a946dba11de4e9f57.pdf cone user guide - http://media.wix.com/ugd/0c3047_80f20b4c30874c07b971f1b61ac16a03.pdf
Auto Firing
Github link to raspberry pi setup - https://github.com/jbruce12000/kiln-controller
Raspberry Pi zero can only connect to the 2.4 ghz network which requires your computer to do the same. To configure your machine to the 2.4ghz network you can follow this guide (windows): https://www.windowsdigitals.com/how-to-change-5ghz-to-2-4ghz-in-windows-10/
Status
Kiln works as of 3/24/2022
Authorization
Authorization is required
Safety
Clear the surrounding area, at least one foot radios, of combustible material, wood, paper and especially aerosol containers.
While firing, before walking away, make sure the hot sign is on the kiln and that bystander have proper warning of extreme heat.
Make sure ceramic wares are cooled below 100 degrees Fahrenheit before handling.