Dyna Kiln N100
Kiln
https://en.wikipedia.org/wiki/Kiln
This particular kiln is currently located in the small metals area by the fume hood and induction furnaces.
Wiring Configuration
Cones - http://media.wix.com/ugd/0c3047_80f20b4c30874c07b971f1b61ac16a03.pdf Cone Chart - http://media.wix.com/ugd/0c3047_48ee6a1c288c4b1a946dba11de4e9f57.pdf cone user guide - http://media.wix.com/ugd/0c3047_80f20b4c30874c07b971f1b61ac16a03.pdf
Auto Firing
After properly configuring the cables access to the interface can be found here: http://kilnpi.local:8081/
Github link to raspberry pi setup - https://github.com/jbruce12000/kiln-controller
Can't connect to site
Raspberry Pi zero can only connect to the 2.4 ghz network which requires your computer to do the same. To configure your machine to the 2.4ghz network you can follow this guide (windows): https://www.windowsdigitals.com/how-to-change-5ghz-to-2-4ghz-in-windows-10/
Status
Kiln works as of 3/24/2022
Authorization
Authorization is required
Safety
Clear the surrounding area, at least one foot radios, of combustible material, wood, paper and especially aerosol containers.
While firing, before walking away, make sure the hot sign is on the kiln and that bystander have proper warning of extreme heat.
Make sure ceramic wares are cooled below 100 degrees Fahrenheit before handling.