Changes

== Starting the torch. ==

== Starting the torch. ==

# Install the tip you need on the torch.

# Install the tip you need on the torch.

# Make sure the torch valve is shut (clockwise).

# Make sure the torch valve is closed (clockwise).

# Turn the pressure regulator T-handle counterclockwise until it is loose.

# Turn the pressure regulator T-handle counterclockwise until it is loose.

# Open the valve at the top of the cylinder 1/4 turn counterclockwise. The right gauge should now be showing the internal pressure of the cylinder and the left gauge should be at 0 psi.

# Open the valve at the top of the cylinder 1/4 turn counterclockwise. The right gauge should now be showing the internal pressure of the cylinder and the left gauge should be at 0 PSI.

# Turn the pressure regulator T-handle clockwise until the desired pressure (12-14 PSI) is shown on the left gauge.  Don't let the pressure get into the red zone (above 15 PSI).

# Turn the pressure regulator T-handle clockwise until the desired pressure (12-14 PSI) is shown on the left gauge.  Don't let the pressure get into the red zone (above 15 PSI).

# Open the torch valve a small amount and use a striker to light the torch. Never use a match or cigarette lighter!

# Open the torch valve a small amount and use a striker to light the torch. Never use a match or cigarette lighter!