1,582
edits
Changes
From Pumping Station One
→Wood Shop Improvement Projects
* Finish hooking up the dust collection for the sanding and small band saw area.
* Finish hooking up the dust collection for the sanding and small band saw area.
* DONE Repair the floor on the flat sheet vertical rack (the bottom is broken) and through away the junk and edit the ticketed items.
* DONE Repair the floor on the flat sheet vertical rack (the bottom is broken) and through away the junk and edit the ticketed items.
* DONE Incorporate a rack for tall sticks of lumber ( 8ft. 2x4's, long rips of narrow material).
* Incorporate a rack for tall sticks of lumber ( 8ft. 2x4's, long rips of narrow material).
* DONE Reorganize "salvage" material storage
* DONE Reorganize "salvage" material storage
** NOW: right quarter of ply rack,
** NOW: right quarter of ply rack,
** small pieces to right of ply rack,
*** small pieces to right of ply rack,
** long skinny pieces in box behind stationary sanders,
*** long skinny pieces in box behind stationary sanders,
** random large pieces to left of alley door
***. random large pieces to left of alley door
* DONE Get the [[Bosch Sliding Compound Miter Saw]] station built.
* DONE Get the [[Bosch Sliding Compound Miter Saw]] station built.
* HALF DONE Build GoogleCal for Major tool Preventive Maintenance with Mfg. recommendations for maintenance tasks
* HALF DONE Build GoogleCal for Major tool Preventive Maintenance with Mfg. recommendations for maintenance tasks
* Jigs and fences for the [[Rockwell Delta 20" Bandsaw]].
* DONE Jigs and fences for the [[Rockwell Delta 20" Bandsaw]].
* DONE Plumb in some air lines. Paul Van Lake anchored the line on the wall next to the ladders so maybe we can tap off of that.
* DONE Plumb in some air lines. Paul Van Lake anchored the line on the wall next to the ladders so maybe we can tap off of that.
* Shop signs. If a member is looking for a practice project post laser or ShopBot authorization, have them make pertinent/helpful tool and warning signs.
* Shop signs. If a member is looking for a practice project post laser or ShopBot authorization, have them make pertinent/helpful tool and warning signs.
* Go through the cabinet under the miter saw and clean out the junk glue and useless material.
* DONE Go through the cabinet under the miter saw and clean out the junk glue and useless material.
* Build shelves under work benches for member projects once racks are made to store glue clamps.
* Build shelves under work benches for member projects once racks are made to store glue clamps.
* DONE Design a better method to store the clamps that are in bins on the floor.
* DONE Design a better method to store the clamps that are in bins on the floor.
* Add racks above sanders router and drill press
* Add racks above sanders router and drill press
* Repair replace worktables
* Repair replace worktables
* prepare vote for new equipment (SawStop, lathe, racks
[[Category:Hosted Areas]]
[[Category:Hosted Areas]]
