The welder is finally functioning. Talk to Ed Bennett or Everett Wilson if you want to learn how to use it. The procedure is:
+
The welder is finally functioning. It can be used for blades for any of the bandsaws. So far, we have just welded carbon blades. Bimetal may be difficult- brazing might be a better choice for these. Talk to Ed Bennett or Everett Wilson if you want to learn how to use the welder. The procedure is:
#Measure 120" (5 table lengths) of the bulk blade of your choice.
#Measure 120" (5 table lengths) of the bulk blade of your choice.
#Cut the blade to length using the shear above the welder.
#Cut the blade to length using the shear above the welder.
Line 82:
Line 82:
#Anneal the blade until dull red (pulse width modulate the anneal button - it doesn't take much).
#Anneal the blade until dull red (pulse width modulate the anneal button - it doesn't take much).
#Grind the weld until smooth and the weld thickness is the same as the blade.
#Grind the weld until smooth and the weld thickness is the same as the blade.