Drill Press Craftsman 20in woodshop
Revision as of 22:10, 10 May 2018 by Whendryx (talk | contribs) (→List of Currently Authorized Users)
![]() | |
Owner/Loaner | PS:One |
---|---|
Usability | yes |
Contact | Eric Beauchamp |
Where | Wood Shop |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $500 |
Host Area | Wood Shop |
The Craftsman 20" drill press is the primary drill press in the wood shop. Authorization is included in the general wood shop authorization. For upcoming authorizations, see the calendar.
Safety
The user manual is available here.
Maintenance
Per the user manual, the drill should be periodically cleaned of dust, the table wiped with wax to prevent rust, and (if needed) the quill lubricated with a dry lubricant like silicone or graphite. Users should perform this maintenance as the drill is used, and PS1 should inspect the drill monthly.
Maintenance history
- July 10, 2017. Drill press motor is not fully connected. Belt may be rubbing on the housing.
- July 14, 2017. One of the two posts that adjusts the motor position is missing its nut. Also, there is a rack-and-pinion lever that moves the motor in and out, and one of the posts had skipped a tooth. I worked it back into position, and I believe it is now safe to use, despite the missing nut. Replacing the nut will require removing the motor, which is a two-person job.
- July 18, 2017. This is fixed now. For the record, the missing nut was M12-1.75. I put some "purple" locktite on both nuts, so hopefully we won't have to take it apart again.
List of Currently Authorized Users
Qualified Member | Trained By | Date |
---|---|---|
Eric Beauchamp | Danger committee | |
Andrew Vaughan | Andy Larkin | April 26, 2017 |
Paul McClay | Ralph Brendler | 5/18/17 |
Jim Handley | Ralph Brendler | 5/13/17 |
Danielle MacDonald | Ralph Brendler | 2017-06-29 |
Christophe Laurent | Ralph Brendler | 8/10/17 |
Sam Yi | Ralph Brendler | 7/27/17 |
Zack Sasnow | Paul Van Lake | 8/3/17 |
Arjun Sharma | Ralph Brendler | 8.10.17 |
Justin Pestka | Ralph Brendler | 8.30.17 |
Sam Dreyer | Ralph Brendler | 8/30/17 |
Jacob Snyder | Ralph Brendler | 9/7/17 |
James Beck | Ralph Brendler | 9/13/17 |
James Marco | Ralph Brendler | 10/5/17 |
Benjamin Nuttin | Ralph Brendler | 11/02/17 |
Karl Healy | Ralph Brendler | 11/2/17 |
Tee | Paul V | 11/09/17 |
Nick Fera | Paul V | 11/09/17 |
Jeremie Davis | Ralph Brendler | 11/16/17 |
Nathan Witt | Ralph Brendler | 11/30/2017 |
Theo T | Ralph Brendler | 11/30/2017 |
Wally Ibrahim | Ralph Brendler | 11/30/17 |
Jeff Hassberger | Ralph Brendler | |
Mac MacDevitt | Paul V | 12/7/17 |
Ben Starett | Ralph Brendler | 12/14/17 |
Ross Hanchett | Ralph Brendler | 12/14/17 |
Michael Donovan | Ralph Brendler | 12/14/17 |
Alex Tomala | Ralph Brendler | 12/21/17 |
Jamin Nollsch | Ralph Brendler | 12/28/17 |
Chris Versteeg | Ralph Brandler | 12/28/17 |
Aaron Vander Bee | Ralph Brendler | 1/11/18 |
Ben Farmer | Ralph Brendler | 1/11/18 |
Joseph Crouch | Ralph Brendler | 1/11/18 |
Bradford Smith | Ralph Brendler | 1/11/18 |
Stephanie Pelzer | Ralph Brendler | 1/11/18 |
Amanda Assaley | Ralph Brendler | 1/11/18 |
Chris Eppig | Ralph Brendler | 1/11/18 |
Patrick Smith | Ralph Brendler | 1/11/18 |
Jeff Gershune | Paul VanLake | 1/16/18 |
Bryan Pennington | Ralph Brendler | 1/25/18 |
Scott Fullman | Ralph Brendler | 2/8/18 |
Brandon Kennedy | Ralph Brendler | 2/22/18 |
Charles Barker | Ralph Brendler | 3/8/18 |
Dan Mach | Ralph Brendler | 3/8/18 |
Nick Prorok | Ralph Brendler | 3/8/18 |
Paul Graham | Ralph Brendler | 3/22/18 |
Mike Gucciard | Ralph Brendler | 3/22/18 |
Wayne Warren | Ralph Brendler | 3/22/18 |
Adam Hall | Paul V | 3/29/18 |
Bill Schroeder | Ralph Brendler | 4/5/18 |
Mike Wilkin | Ralph Brendler | 4/19/18 |
Alex Lanigan | Ralph Brendler | 4/19/18 |
Jessica Jokhi | Ralph Brendler | 4/19/18 |
Matt Maggio | Ralph Brendler | 4/19/18 |
Jonathan Frink | Ralph Brendler | 4/19/18 |
Gary Newhouse | Eric Beauchamp | 4/26/18 |
Dave DesRoberts | Paul Van Lake | 4/26/18 |
Jennifer DesRoberts | Paul Van Lake | 4/26/18 |
John Burkholder | Ralph Brendler | 5/03/18 |
Wayne Hendryx | Chris Iacullo | 4/19/18 |