49
edits
Changes
From Pumping Station One
→Second Floor: Strikeout PP2-1:18; I tried to shut off the unit heaters here with no success
This page is very out of date.
The General Operations Team is in the process of documenting changes as we find them.
In 2020 we updated locations of switches for lighting.
In june 2021 we are documenting power panels and breakers as best we know. More to come
== Power Panels ==
Outlets generally have the power panel number and the circuit labeled on them, some newer outlets do not.
'''PP1-2'''
=== First Floor ===
====PP1-1====
Back of the shop by the loading dock. Can't miss it. Served from main switch by back door (probably from the upper disconnect, but haven't verified).
Single phase and 2 pole circuits wired to 3 phase breakers.
Several high amp 3 phase breakers that are unmapped.
Electrician moved some things around and added a new thing 10/17/22. (This is all I know.)
{| border="1" class="sortable"
!PP1-1 east wall cold small
!
!
!
!as of june 2022
!
!
|-
!
|
|
|
|
|
|
|-
!breaker
|amps
|controls
|
|breaker
|amps
|controls
|-
!1
|
|"two color press"
|
|2
|
|
|-
!3
|
|"two color press"
|
|4
|
|
|-
!5
|
|"two color press"
|
|6
|
|soft met outlets
|-
!7
|30
|AC
|
|8
|
|
|-
!9
|30
|AC
|
|10
|
|clock
|-
!11
|30
|AC
|
|12
|
|
|-
!13
|40
|
|
|14
|20
|
|-
!15
|40
|
|
|16
|20
|
|-
!17
|20
|
|
|18
|20
|
|-
!19
|20
|boiler & pumps
|
|20
|30
|air compressor
|-
!21
|20
|boiler & pumps
|
|22
|30
|air compressor
|-
!23
|20
|boiler & pumps
|
|24
|30
|air compressor
|-
!25
|30
|dock leveler
|
|26
|60
|laser
|-
!27
|30
|dock leveler
|
|28
|60
|laser
|-
!29
|30
|dock leveler
|
|30
|60
|laser
|}
The following is the result of wire tracing done 04/25/2017. Tucker
<br />
Conduits from this panel were sharpie labeled with letters for this mapping.
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
! Conduit Label !! feed path !! What It Feeds
|-
| A || direct run across ceiling to junction in catwalk, from junction along catwalk and down to PP1-5 || PP1-5
|-
| B || Via PB1-2 to roof || AC
|-
| C || To junction above SE corner of boiler room, then to socket on boiler room wall || Socket PP1-1:10 on small metals wall near S end of wall
|-
| D || direct run to boiler room || main boiler room feed
|-
| E || across shop celing to catwalk || Feeds through wall to upstairs rooms
|-
| F || across shop roof to junction ~7ft from old laser exhaust, leg towards east wall dead ends, leg S drops to kitchen wall, runs into new lounge, takes 90deg through lounge wall and into safe||PP6
|-
| G || Direct to boiler room || compressor
|-
|}
====PP1-2====
Back of the shop by the loading dock. Can't miss it. Fed from big breaker at the top of PP1-1.
{| class="wikitable sortable"
! PP1-2 east wall btwn CM & SM !! !! !! !! as of 6/5/2021 !! !!
|-
| || || || || || ||
|-
| breaker || amps || controls || || breaker || amps || controls
|-
| 1 || 20 || round lights || || 2 || 20 || fan 17 - 19
|-
| 3 || 20 || south lights || || 4 || 20 ||
|-
| 5 || 20 || south lights 2 || || 6 || 20 || alarm
|-
| 7 || 20 || north lights 2 || || 8 || 20 || recept north wall by boilers
|-
| 9 || 20 || north lights || || 10 || 20 || hvac exhaust fans
|-
| 11 || 30 || north lights || || 12 || || dock
|-
| 13 || 40 || || || 14 || 20 || south wall recepticals
|-
| 15 || 40 || || || 16 || 20 || soft metal
|-
| 17 || 20 || || || 18 || 20 || soft metal
|-
| 19 || 20 || || || 20 || 20 || soft metal
|-
| 21 || 20 || || || 22 || || soft metal
|-
| 23 || 20 || || || 24 || 20 || "oxy dry heater"
|-
| 25 || 30 || catwalk lights || || 26 || 20 || stopsaw
|-
| 27 || 30 || soft metal || || 28 || 20 ||
|-
| 29 || 30 || soft metal || || 30 || 20 || power drop
|-
| 31 || || || || 32 || 20 || power drop
|-
| 33 || || || || 34 || || power drop
|-
| 35 || || || || 36 || 20 || power drop
|-
| 37 || || powder coat oven || || 38 || 20 || power drop
|-
| 39 || || powder coat oven || || 40 || 20 || power drop
|-
| 41 || || || || 42 || 20 || soft metal GFS outlet
|}
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
|-
! Breaker # !! Used !! What Is It
! Breaker # !! Used !! What Is It or was a few years ago
|-
| 1 || Yes, works || Round lights and ceiling lampholders in Cold Metals
|-
| 3 || Yes, works || "South" lights (Cold Metals east wall), emergency lights EL-6, EL-7
|-
| 6 || Yes, works || 20amp, 2 outlets hot metal side of furnace room, short drop near center of shop. Light in the boiler room.
|-
| 8 || Yes, works || 20 amp, outlet at hot metal side of furnace room, possibly second outlet behind lockers.
|-
|-
| 7,9,11 || yes. works. || Power to chiller/heat pump on the roof for AC... and also the air handler under it inside. The
| 7,9,11 || yes. works. || Power to chiller/heat pump on the roof for AC... and also the air handler under it inside. The
|-
|-
|25 || yes , works || Lights at catwalk and kitchen, outlet at kitchen fridge.
|10 || yes , works || Exhaust fan, Doorbell, Back Door Beaglebone
|-
|25 || yes , works || Lights at kitchen, outlet at kitchen fridge. Catwalk light controls, but not the lights themselves. Emergency light EL-8.
|-
|26 || yes, works || Currently connected to the entire east wall. This includes dust collector and Clausing electronics. Please do not connect chop saw table to east wall while others are working.
|-
| 35&37 || used || Compressor 40 amp 1 phase 240v thru a 35 amp disconnect in boiler room.
|}
<br />
The following is the result of wire tracing done 04/25/2017. Tucker
<br />
Conduits from this panel were sharpie labeled with letters for this mapping.
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
! Conduit Label !! feed path !! What It Feeds
|-
| A || dead ends 20' into shop ||
|-
| B || into PB1-2, through wall into dock || 220V welder outlet on N wall above hydraulic pump
|-
| C || into PB1-2, then to Pj1-1, then down to PB1-1 || rear door exit sign, and sockets above PP1-1 labeled as PP1-1:10
|-
| D || conduit runs to PB1-2, but has no lines || no lines in this conduit
|-
| E || Junction in ceiling above cold metals, which feeds 3 things:
* hanging 220V 1phase twistlock above Johnson bandsaw
* fat pipe out of junction to south takes 90deg east and feeds hanging 120V sockets over lockers
*narrow conduit south takes 90deg turn and tracks back towards boiler room, feeding an unused junction/socket in the boiler room wall
**4th conduit from this junction goes north and dead ends
|-
| F || direct to lights in ceiling ||Shop lights, 2nd row from the East wall
|-
| G || direct to lights in ceiling || shop lights, 3rd and 4th rows from East wall
|-
| H || across shop ceiling and down East wall || 120V outlet run along East wall of cold metals
|-
|-
|}
|}
====Small fuse box====
Back of the shop, left of PP1-1, above the light switches. <br>
Back of the shop, left of PP1-1, above the light switches. <br />
Left fuse, exit signs.
Left fuse, exit signs.<br />
traced wiring 4/25/2017, and both fuses appear to feed the fans for the heaters in the ceiling, and the junction boxes next to the roof vents. While this fuse panel does feed into the junction that feeds the exit signs, it is just passing through and does NOT actually feed the exit sign: Tucker
====PB1-1====
This junction is fed by 2 different wiring paths:
*The first wiring path comes from the small fuse box (listed above), and passes through the socket box labeled PP1-1-2:10, then through PB1-1 and up ~4ft to PJ1-1. From PJ1-1, it passes through PB1-2 and out too a conduit in the ceiling where it splits to feed the heater fans (with the exception of the SW one), and the junctions next to the 2 vents in the ceiling
*The second wiring path starts at PP1-2, goes up the conduit labeled 'C' to PB1-2. From there it goes out to PJ1-1, and then down to PB1-1. From PB1-1 it feeds the exit sign over the back door, and the sockets above PP1-1 labeled PP1-1-2:10
====PB1-2====
Power box connected to PP1-1 by conduit. Bridges the A/C heat pump/air handler circuit, among other things. The 3-phase for A/c heat pump and air handler is bridged such that the entire 3 phase comes from PP1-1 up to the roof via PB1-2, and a branch switched on the roof by relay comes back down in the same conduit that goes the the roof. This circuit is passed via conduit to the air handler, and switched manually on the bottom of the air handler.
Power box connected to PP1-1 by conduit. Bridges the A/C heat pump/air handler circuit, among other things. The 3-phase for A/c heat pump and air handler is bridged such that the entire 3 phase comes from PP1-1 up to the roof via PB1-2, and a branch switched on the roof by relay comes back down in the same conduit that goes the the roof. This circuit is passed via conduit to the air handler, and switched manually on the bottom of the air handler.
'''PP1-3'''
Below is the result of wire tracing done 04/25/2017. Tucker
This junction is a pass through for circuits from PP1-1, PP1-2 and the small fuse box.
*Small fuse box
**lines go through PB1-1->PJ1-1->PB1-2->roof and supply heater fans
*PP1-1
**This circuit feeds through the conduit marked 'B' to the roof and presumably the AC (see note from previous mapping)
*PP1-2
** from conduit 'B', the circuit feeds through the wall behind PB1-2 and into the dock, where it supplies the 220V welder outlet on the back wall above the hydraulic pump.
** from conduit 'C' -> PB1-2 -> PJ1-1 -> PB1-1 -> exit sign over back door, and the outlets above PP1-1
** Conduit 'D' connects PP1-2 and PB1-2, but no wires are run inside.
====PP1-3====
Metal shop, by the lathes.
Metal shop, by the lathes.
! Breaker # !! Used !! What Is It
! Breaker # !! Used !! What Is It
|-
|-
|1, a&b||yes, works||20 amp, hot metal exhaust fan.
|1, a&b||yes, works||20 amp.
|-
|-
|3, a&b || ? ||
|3, a&b || ? ||
|-
|-
| 5&7, a&b || yes, works || 50 amp, 240v, hot metal at welding area.
| 5&7, a&b || yes, works || 50 amp, 240v, cold metal.
|-
|-
| 5b & 7a || yes works|| 20 amp 240v, dedicated Clausing lathe.
| 5b & 7a || yes works|| 20 amp 240v, dedicated Clausing lathe.
|}
|}
====PP1-4====
On east wall of shop close to the rear sliding door to the dock
{| border="1" class="sortable"
!pp1 4 east of tormach
!
!
!
!as of june 2021
!
!
|-
!
|
|
|
|
|
|
|-
!breaker
|amps
|controls
|
|breaker
|amps
|controls
|-
!1
|
|
|
|2
|30
|deckle/Bridgeport
|-
!3
|
|
|
|4
|30
|deckle/Bridgeport
|-
!5
|
|
|
|6
|30
|deckle/Bridgeport
|-
!7
|
|
|
|8
|30
|leblonde
|-
!9
|
|
|
|10
|30
|leblonde
|-
!11
|15
|spray booth fan
|
|12
|30
|leblonde
|-
!13
|15
|spray booth fan
|
|14
|50
|sm 240
|-
!15
|15
|spray booth fan
|
|16
|50
|sm 240
|-
!17
|80
|
|
|18
|50
|sm 240
|-
!19
|80
|
|
|20
|15
|assembly drop outlet
|-
!21
|
|
|
|22
|
|
|-
!23
|30
|tormach
|
|24
|20
|
|-
!25
|30
|tormach
|
|26
|20
|
|-
!27
|
|
|
|28
|
|
|-
!29
|20
|lathe outlet
|
|30
|20
|
|-
!31
|100
|
|
|32
|
|
|-
!33
|100
|
|
|34
|
|
|-
!35
|100
|
|
|36
|
|
|-
!37
|20
|small metals drop
|
|38
|60
|kitchen oven
|-
!39
|
|
|
|40
|60
|kitchen oven
|-
!41
|
|
|
|42
|60
|kitchen oven
|}
The following is the result of wire tracing done 04/25/2017. Tucker
Conduits from this panel were sharpie labeled with letters for this mapping.
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
! conduit label !! routing !! What It feeds
|-
| A || up to shop ceiling || 3phase drop to DoAll band-saw
|-
| B || Up to ceiling and a junction, One leg out of the Junction feeds a 220V 50A drop in small metals (used to feed welder when hot metals lived there), second run from junction feeds unused junction box on S wall of boiler room || 50A 220V drop in small metals
|}
====PP1-5====
Cold Metal shop,
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
{| border="1" class="sortable"
!pp1-5 corner btwn lathe and mill
!
!
!
!as of june 2021
!
!
|-
!
|
|
|
|
|
|
|-
!breaker
|amps
|controls
|
|breaker
|amps
|controls
|-
!
|100
|
|
|
|
|
|-
!
|100
|
|
|
|
|
|-
!1
|100
|
|
|2
|15
|
|-
!3
|100
|
|
|4
|15
|
|-
!5
|15
|
|
|6
|15
|
|-
!7
|15
|
|
|8
|15
|
|-
!9
|20
|server 2nd fl closet
|
|10
|20
|
|-
!11
|30
|server 2nd fl closet
|
|12
|20
|server tower a
|-
!13
|20
|
|
|14
|20
|server tower B
|-
|-
! Breaker # !! Used !! What Is It
!15
|20
|
|
|16
|20
|util outlets catwalk
|-
|-
| 1 || yes. works. || [[Lounge]] Everything. Upstairs bathroom for reasons unknown.
!17
|30
|
|
|18
|
|
|-
|-
!19
|30
|
|
|20
|
|
|}
|}
====PP1-6====
In the safe in the lounge. The top big breaker is the service disconnect for the whole box. This box covers everything in the lounge, the front entryway, and the upstairs bathroom.
{| border="1" class="sortable"
!safe
!
!
!
!as of june 2021
!
!
|-
!
|
|
|
|
|
|
|-
!breaker
|amps
|controls
|
|breaker
|amps
|controls
|-
!
|50
|lounge everything
|
|
|
|
|-
!
|50
|lounge everything
|
|
|
|
|-
!1
|20
|BOSS
|
|2
|20
|safe
|-
!3
|20
|BOSS
|
|4
|20
|AC wall
|-
!5
|20
|Toilets
|
|6
|20
|bar wall
|-
!7
|20
|flor lts
|
|8
|20
|Boss chiller
|-
!9
|20
|epilog
|
|10
|20
|laser exhaust
|-
!11
|20
|
|
|12
|20
|laser exhaust
|-
!13
|
|
|
|14
|
|
|-
!15
|
|
|
|16
|
|
|-
!17
|
|
|
|18
|
|
|-
!19
|
|
|
|20
|
|
|}
====PP1-7====
Blue fuse box in the furnace room. Powers just the air compressor.
Blue fuse box in the furnace room. Powers just the air compressor.
===Second Floor===
====PP1-8====
3515, by the back door
This is mostly the lights and outlets in the main room, and the loading dock
{| border="1" class="sortable"
!pp1-8 woodshop
!
!
!
!as of june 2021
!
!
|-
!
|
|
|
|
|
|
|-
!breaker
|amps
|controls
|
|breaker
|amps
|controls
|-
!
|
|
|
|
|
|
|-
!1
|20
|lights
|
|2
|20
|outlets
|-
!3
|20
|lights
|
|4
|20
|outlets
|-
!5
|20
|outlets
|
|6
|20
|outlets
|-
!7
|20
|outlets
|
|8
|20
|outlets in DC closet
|-
!9
|20
|
|
|10
|20
|outlets
|-
!11
|20
|outlets cord drop reel
|
|12
|20
|outlets
|-
!13
|20
|loadinf dock outlet light and garage dr
|
|14
|20
|lights
|-
!15
|20
|outlets cord drop reel
|
|16
|20
|lights
|-
!17
|
|
|
|18
|20
|lights
|-
!19
|
|
|
|20
|20
|outlets ceiling drop
|-
!
|}
{| border="1" class="sortable"
!pp1-9
!
!
!
!as of june 2021
!
!
|-
!
|
|
|
|
|
|
|-
!breaker
|amps
|controls
|
|breaker
|amps
|controls
|-
!1
|15
|new lathe
|
|2
|30
|
|-
!3
|15
|new lathe
|
|4
|30
|
|-
!5
|30
|
|
|6
|20
|
|-
!7
|30
|
|
|8
|30
|
|-
!9
|15
|band saw
|
|10
|30
|
|-
!11
|15
|band saw
|
|12
|20
|
|-
!13
|20
|griz planer
|
|14
|20
|
|-
!15
|20
|griz planer
|
|16
|
|
|-
!17
|20
|chop saw
|
|18
|20
|labeled table saw label but not current saw. Outlet is on column with current sawstop. REAL SAWSTOP breaker is in eastmost panel in hot metals
|-
!19
|30
|
|
|20
|20
|table saw label but not.. ganged with 18 above
|-
!21
|30
|
|
|22
|
|
|-
!23
|30
|
|
|24
|20
|
|-
!25
|20
|
|
|26
|20
|
|-
!27
|
|
|
|28
|30
|shopbot
|-
!29
|20
|
|
|30
|30
|shopbot
|-
!31
|20
|
|
|32
|20
|
|-
!33
|
|
|
|34
|
|
|-
!35
|20
|
|
|36
|20
|
|-
!37
|20
|
|
|38
|
|
|-
!39
|
|
|
|40
|
|
|-
!41
|20
|
|
|42
|20
|blast gates & air cleaners
|}
{| border="1" class="sortable"
!pp1-10. Hot metals
!
!
!
!as of june 2021
!
!
|-
!breaker
|amps
|controls
|
|breaker
|amps
|
|-
!1
|60
|CNC Plasma cutter
|
|2
|40
|3PH welder #2
|-
!3
|60
|CNC Plasma cutter
|
|4
|40
|3PH welder #2
|-
!5
|60
|CNC Plasma cutter
|
|6
|40
|3PH welder #2
|-
!7
|40
|3PH welder #1
|
|8
|40
|1 PH welder #2
|-
!9
|40
|3PH welder #1
|
|10
|40
|1 PH welder #2
|-
!11
|40
|3PH welder #1
|
|12
|20
|recep south wall
|-
!13
|40
|1 PH welder #1
|
|14
|20
|recep cnc plasma
|-
!15
|40
|1 PH welder #1
|
|16
|20
|
|-
!17
|40
|receps s wall
|
|18
|20
|recep cord reel
|-
!19
|20
|receps east wall
|
|20
|20
|grinder
|-
!21
|20
|
|
|22
|20
|grinder
|-
!23
|20
|receps east wall
|
|24
|20
|grinder
|-
!25
|20
|receps east wall
|
|26
|20
|recep quad drop
|-
!27
|20
|
|
|28
|20
|
|-
!29
|20
|receps east wall
|
|30
|20
|recep
|-
!31
|20
|
|
|32
|30
|Sawstop
|-
!33
|20
|
|
|34
|30
|Sawstop
|-
!35
|20
|
|
|36
|
|
|-
!37
|20
|
|
|38
|
|
|-
!39
|20
|
|
|40
|
|
|}
=== Second Floor ===
'''PP2-1'''
'''PP2-1'''
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
|-
! Breaker # !! Used !! What Is It
! Breaker # !! Used !! Amperage !! What Is It
|-
| 1 || in use || 100 || Main breaker for box - Tandem with #3
|-
| 3 || in use || 100 || Main Breaker for box - Tandem with #1
|-
| 5 || || 20 || Tandem with #7
|-
| 6 || || 20 ||
|-
| 7 || || 20 || Tandem with #5
|-
| 8 || in use || 20 || Back stairwell lights, catwalk lights, night light in the shop..
|-
| 9 || || 20 ||
|-
| 10 || in use || 20 || Mid lights
|-
| 11 || || 20 ||
|-
| 12 || in use || 20 || Electronics area lights
|-
| 13 || in use || 20 || CNC area
|-
| 14 || in use || 20 || Arts lights
|-
| 15 || in use || 20 || Electronics area north wall (light switch)
|-
| 16 || || 20 ||
|-
| 17 || || 20 ||
|-
| 18 || in use || 20|| <s>Shop heating radiator fans and thermostats.</s> Not totally true, need to clarify.
|-
| 19 || || 15 ||
|-
| 20 || in use || 15 || Outlet in closet
|-
| 21 || || 30 || Tandem with #23
|-
| 22 || unused || none ||
|-
| 23 || || 30 || Tandem with #21
|-
|-
| 18 || yes. works. || Shop heating radiator fans and thermostats.
| 24 || unused || none ||
|-
|-
|}
|}
'''PP2-2'''
'''PP2-2'''
On the catwalk.<br>
On the catwalk.<br />
This is a 3 phase panel,"High Leg Delta" configuration, http://en.wikipedia.org/wiki/High-leg_delta The center bus bar is 208v to neutral.
This is a 3 phase panel,"High Leg Delta" configuration, http://en.wikipedia.org/wiki/High-leg_delta The center bus bar is 208v to neutral.
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
|-
! Breaker # !! Used !! What Is It
! Breaker # !! Used !! Amperage !! What Is It
|-
| 1 || in use || 20 || above kitchen ceiling, servers on catwalk
|-
| 2 || in use || 20 || 2 lower outlets, in kitchen either side of door. Outlet at SEM location
|-
| 3 || Not used || none || 208 volts to neutral, not recommended for use except in 3 phase circuit.
|-
|-
| 1 || yes, works || 20 amp,above kitchen ceiling, servers on catwalk
| 4 || Not used || none || 208 volts to neutral, not recommended for use except in 3 phase circuit.
|-
|-
|2|| yes works || 20 amp, 2 lower outlet, either side of kitchen door. Outlet at proposed SEM location
| 5 || in use || split 20 || 2 circuits a&b, Beer church.
|-
|-
| 3 || Not used || 208 volts to neutral, not recommended for use.
| 6 || in use || 20 || Tandem with #8 - 240v,
|-
|-
| 4 || Not used || 208 volts to neutral, not recommended for use.
| 7 || in use || 20 ||
|-
|-
| 5 || yes works || split 20 amp breaker, 2 circuits a&b, Beer church.
| 8 || in use || 20 || Tandem with #6 - 240v
|-
|-
|6&8 || yes works || 20 amp 240v, Oven, 8 gauge, 4 wires, capable of 50 amps
| 9 || Not used || none || 208 volts to neutral, not recommended for use except in 3 phase circuit.
|-
|-
| 9 || Not used || 208 volts to neutral, not recommended for use.
| 10 || Not used || none || 208 volts to neutral, not recommended for use except in 3 phase circuit.
|-
|-
| 10 || Not used || 208 volts to neutral, not recommended for use.
| 11 || in use || 20 ||
|-
|-
| 11 || yes, works || 20 amp, outlets on shop side of kitchen walls at current hot metal
| 12 || in use || 20 || Tandem w #14 240 v outlet in kitchen
|-
|-
|12&14 || yes, works || 20 amp 240v, kitchen,above counter. For induction cook top
| 13 || in use || 30 || Tandem with #15 & #17 - Bridgeport
|-
|-
|13 || yes works || 20 amp, Laser
| 14 || in use || 20 ||Tandem with #12 - outlet in kitchen
|-
|-
| 15 || Not used || 208 volts to neutral, not recommended for use.
| 15 || in use || 30 || Tandem with #13 & #17 - Bridgeport
|-
|-
| 16 || Not used || 208 volts to neutral, not recommended for use.
| 16 || Not used || none || 208 volts to neutral, not recommended for use except in 3 phase circuit.
|-
|-
| 17 || yes, works || 20 amp, 4 above counter kitchen outlets, which are labelled as such
| 17 || in use || 30 || Tandem with #13 & #15 - Bridgeport
|-
|-
|18 || yes works || 20 amp, Outlet at proposed SEM location
| 18 || in use || 20 || Outlet at SEM location
|}
|}
= Electrical Punch List =
== Desired Circuits ==
=== Hot Metals ===
=== Wood Shop ===
drops: http://www.mcmaster.com/#4804k12/=pmf353 ??
== Other goodies ==
100 amp 5 wire 3 phase disconnect with lugs sufficient for #1 feeder cable. This could be located anywhere that is convenient.
= Light Switches =
=== Upstairs: Arts and Electronics Areas ===
There are five lighting circuits upstairs, four of which are on three-way switches.
* There is a switch next to the front stairway for stairwell and upstairs landing (the other switch is at the bottom of the stairs). Leave this light on.
* There are three switches on the Arts side of the stairwell labelled 'Arts' 'Electronics' and 'Mid'. There is an identical set of switches by the door to the back stairway.
** Arts is the lights on the arts side of the upstairs
** Electronics is two rows of lights on the electronics side
** Mid is one row of lights in electronics
* Many of the fixtures in electronics have individual pull-switches (wall switch must be on)
* The switch for the lights in front of the shelves on the north wall of the electronics lab is behind the shelves. Follow the conduit that comes down from the ceiling.
=== Cold Metals, General Shop, Small Metals ===
The shop lights are near the back door -- look to the left of the loading dock, to the left
of the electrical panels with the clock sitting on top. There's a row of
with a red panel around them.
There's no way to turn these lights on from the other end of the shop. But a switch in Cold metals next to the sliding door into the lounge does turn on a small bank in the center of the room for safety.
One light should stay on for safety. If there are zero lights on, turn one on.
Switches that have clear plastic covers don't need to be messed with.
=== Lounge ===
The lounge has a simple light switch arrangement.
=== CNC Room ===
* Four switches by the front entrance that control the lights in the main part of the room
* Two switches by the safe to the left, one for the safe lights and one for the short hall by the doorway to the shop
* One switch to the right of the safe, that controls the outlet on the ceiling in the center of the room.
=== Wood Shop / Hot Metals ===
* Both the Wood Shop and Hot Metals share light controls. Switches are located near the loading dock doors spread over two clusters of switch boxes either side of the electrical panels.
* There is a switch next to the HotMetals street door that turns on the very center of Hot Metals & the Wood shop, it is a 3-way with a switch in the clusters noted above.
[[Category:Facilities]]
[[Category:Facilities]]
