Changes

#* If the burner still does not light, check the valve on the propane tank is open far enough

#* If the burner still does not light, check the valve on the propane tank is open far enough

#* If the burner does not light after a second attempt '''DO NOT ATTEMPT TO LIGHT IT AGAIN''' contact the area host for instructions on how to proceed.

#* If the burner does not light after a second attempt '''DO NOT ATTEMPT TO LIGHT IT AGAIN''' contact the area host for instructions on how to proceed.

# Once the burner is lit adjust the valve until there is a constant feathered flame

# Once the burner is lit adjust the valve until there is a constant feathered flame. The burners use the venturi effect for the air/fuel mixture.

#* If you are unable to get a constant flame do not use the forge and contact the area host for further instructions

#* If you are unable to get a constant flame do not use the forge and contact the area host for further instructions

# If you require the second burner open the valve for the rear burner 1/8th of a turn and allow it to light

# If you require the second burner open the valve for the rear burner 1/8th of a turn and allow it to light