Changes

{{Template:EquipmentPage

{{Template:EquipmentPage

|owner = Matt Triano

|owner = Matt Triano

|image = Jointer.jpg

|image = Jointer.jpg

}}

}}

==Rules==

== Rules ==

# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.

# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.

# Remove the smallest amount of material possible and feed it at an appropriate speed. More passes are better than fewer. If you don't know how to properly adjust the infeed table, ask for help.

# Remove the smallest amount of material possible and feed it at an appropriate speed. More passes are better than fewer. If you don't know how to properly adjust the infeed table, ask for help.

# Always use the vacuum while running the jointer. Otherwise, it will clog with chips.

# Always use the vacuum while running the jointer. Otherwise, it will clog with chips.

# If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage to the machine, ruin their work, or hurt themselves by using a broken tool.

# If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage to the machine, ruin their work, or hurt themselves by using a broken tool.

# Always vacuum the machine, cutting area, and the table around the machine when you are done.

# Always vacuum the machine, cutting area, and the table around the machine when you are done.

|-

|-

|}

|}