LeBlond Regal

LeBlond Regal

Owner/Loaner	PS1
Serial Number	6C 1319
Make/Model	LeBlond Regal
Arrival Date	May 2018
Usability	Yes
Contact	Host Cold Metals
Where	Cold Metals
Authorization Needed	Yes
Hackable	No
Estimated Value	5000
Host Area	Cold Metals

Specifications

Swing over bed 15 1/2 " Length of bed 54" Power required - 220 3 ph 30a ckt

NOTE: The manual specifies SAE 20 oil, it is the same as ISO 68 or Way oil

Auth/Use Notes

Danger Committee May 2018

 Anna Yu - Chair,  Jim Brink, Sevin, Ed Bennett, Abel Greenwood.

To-Do

Status	Item	Person Working on Item	Comments
	Some cleaning of oil ports may be needed before topping off oil reservoirs, also should existing oil be drained?
	Should we replace hydraulic filter? It's not mentioned in the manual but it seems like something you may want to change?	Jim	Per discussion Tuesday 5/29 we will top off resevoir and run as-is for a few months then replace oil
	Top off oil reservoirs, oil machine and follow maintenance in manual as far as I can tell all reservoirs should have ISO 68 (Way) oil.
	Chuck needs to be removed and cleaned
	Fit the tool post
	We need a plank to put under the chuck on removal.
	Do we need some device to help lift chucks on removal ( they weigh approx 100#) a lightweight Harbor Freight hoist is about $70
	Taper attachment needs to be cleaned and tested
	Level and check for taper
	Any tooling needed?
	Do we want to fit a DRO? NOTE: the Cold metals budget is getting tight for this tool we may budget this in 2019
	Do we want to fit cooling?
	Carrage lock nofunctional
	Authorization path
	Estop	Jim	Spoke to Roger (888-532-5663) LeBlond does not have a product or document to retrofit this machine 5/30

Equipment

Dorian Tool Post BXA size

Tool Holders;

 1) Dorian Tool Series BXA, Number 1, Turning & Facing Tool Post Holder 3-1/4 Inch Overall Length, 2-1/4 Inch Overall Height, 5/8 Inch Maximum Cutting Tool Size, 1-5/16 Inch High Centerline

 Tool For this holder; 
   A) Dorian Tool STNC, Right Hand Cut, 3° Lead Angle, 5/8" Shank Height x 5/8" Shank Width, Indexable Turning Toolholder  4" OAL, Screw Holding Method
          MSC Part #: 47145917 Mfr Part #: 73310151738
      Uses Insert- Insert Inscribed Circle (Inch) 1/4 Style N, 3 degree TCMT 1/4 LC
      https://www.mscdirect.com/product/details/47145917?orderedAs=73310151738&rd=k&searchAhead=true&searchAheadTerm=73310151738&        typahddsp=73310151738%20(MSC%20%2347145917)&hdrsrh=true

 2) Dorian Tool Series BXA, Number 2, Boring, Turning & Facing Tool Post Holder 3-1/4 Inch Overall Length, 1-3/4 Inch Overall Height, 5/8 Inch Maximum Cutting Tool Size, 1-5/16 Inch High Centerline

 Tool for this holder;
   A) Dorian Tool .59" Min Bore Diam, 1/2" Shank Diam, 6" OAL, STCMB Indexable Boring Bar 1-1/2" Max Bore Depth, Screw Holding Method
      Uses Insert- Insert Inscribed Circle (Inch) 1/4 Style N, 3 degree TCMT 1/4 LC
      https://www.mscdirect.com/product/details/47146014?orderedAs=73310155740&rd=k&searchAhead=true&searchAheadTerm=73310155740&typahddsp=73310155740%20(MSC%20%2347146014)&hdrsrh=true

 3) Dorian Tool Series BXA, Number 71C, Cutoff & Grooving Tool Post Holder 3-1/4 Inch Overall Length, 1-3/4 Inch Overall Height, 1.3118 Inch High Centerline
     Uses Insert- SGIH19-2 Blade 
     https://www.mscdirect.com/product/details/79046561?orderedAs=73310101276&rd=k&searchAhead=true&searchAheadTerm=73310101276&typahddsp=73310101276%20(MSC%20%2379046561)&hdrsrh=true

 4) Dorian Tool Series BXA, Number 881, Threading Tool Post Holder with External On Edge Cartridge 4-31/84 Inch Overall Length, 1-3/4 Inch Overall Height, 1/8 Inch Thick, 1 Inch High Centerline, 3/8 Inch Insert Inscribed Circle
  Uses Insert-  SGIH19-2 Blade
  https://www.mscdirect.com/product/details/79047817

References

Manual -> https://wiki.pumpingstationone.org/images/LeBlond_Regal.pdf

List of Currently Authorized Users

Qualified Member	Trained By	Date Trained	Comments