Changes

|serial = KT-PR0013-5509

|serial = KT-PR0013-5509

|arrived = January 2014

|arrived = January 2014

|doesitwork = yes

|doesitwork = no

|contact = Elizabeth

|contact = Elizabeth

|where = [[CNC]] 2nd Floor

|where = [[CNC]] 2nd Floor

== Status ==

== Status ==

Extruder nozzle clogged. Needs unclogging or nozzle replacement. (As of 4/15/2015, seems ok?)

Extruder nozzle clogged. Needs unclogging or nozzle replacement. (As of 4/28/2015, clogged)

SD card reader DOES NOT WORK. Works only in tethered mode, driven by USB from a computer.

SD card reader DOES NOT WORK. Works only in tethered mode, driven by USB from a computer.

Spool hanging bolt on enclosure sure could use an upgrade. The spool falls off as it is, after a bit.

Spool hanging bolt on enclosure sure could use an upgrade. It is long enough but there is no positive catch to keep the spool in place.  

== Operation ==

== Operation ==