1,524
edits
Changes
From Pumping Station One
no edit summary
|serial = KT-PR0013-5509
|serial = KT-PR0013-5509
|arrived = January 2014
|arrived = January 2014
|doesitwork = no
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|contact = [[CNC|CNC Area Host]]
|where = [[CNC]] 2nd Floor
|where = [[CNC]] 2nd Floor
== Status ==
== Status ==
As of 12/10/2015 Undergoing testing. Functional. New LCD installed, SD card reader should be working but has not been tested in use. Fiberglass flexible print bed add-on installed. Firmware updated for new Hexagon extruder heads, no longer compatible with Flexistruder, for now. Hexagon heads need to be set higher than old heads (temperatures will need to be higher.) Additional testing required to advise what temperatures are best.
As of 11/13/2015 the main PLA/ABS extruder is not working, replacement extruders and parts are ordered or awaiting installation by CNC Area Host.
As of 11/13/2015 the main PLA/ABS extruder is not working, replacement extruders and parts are ordered or awaiting installation by CNC Area Host.
