844
edits
Changes
From Pumping Station One
→Suggested Settings
=== Suggested Settings ===
=== Suggested Settings ===
==== Printer settings ====
[[File:Taz3_printer_settings.ini]]
This file is for the 'printer settings' tab of Slic3r. It defines bed size, machine type and specifications, retraction and number of extruders. It also includes start/end gcode. This file will automatically disable both heaters when an object finishes printing.
==== Filament Settings ====
[[File:Taz3_filament_settings.ini]]
This file is for the 'filament settings' tab of Slic3r. It defines things like filament diameter and extruder/bed temperatures. This is also where the 'fast layer' settings are, which allow you to adjust the print speed for small layers.
==== Print Settings Without Support - Fast ====
[[File: Taz3_print_settings_NO_SUPPORT.ini]]
This file is for the 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile does not include support, so for large overhangs you'll need the next configuration file.
==== Print Settings With Support - Fast ====
[[File: Taz3_print_settings_SUPPORT.ini]]
This file is for 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile includes support, appropriate for large overhangs.
=== Other Resources ===
=== Other Resources ===
