Domain Admins
15
edits
Changes
Jump to navigation
Jump to search
Line 73:
Line 73: + + − + − + Line 84:
Line 86: − + Line 90:
Line 92: − + +
no edit summary
Both of these files have appropriate settings for the 'printer settings' and 'filament settings' tabs. To use them, go to File > Load Config in Slic3r and select the downloaded file. You must then go to each tab and hit the 'save' icon next to the settings selection dropdown box, or else Slic3r will forget the settings when you close it.
Both of these files have appropriate settings for the 'printer settings' and 'filament settings' tabs. To use them, go to File > Load Config in Slic3r and select the downloaded file. You must then go to each tab and hit the 'save' icon next to the settings selection dropdown box, or else Slic3r will forget the settings when you close it.
For settings in Simplify3D, you need to 'import FFF profile'. This can be found under File/Import FFF Profile, then browse your computer to find it.
==== ABS for Simplify3D ====
==== ABS for Simplify3D ====
[[File:ABS_Simplify3D.zip]]
[[File:ABS Fast2.0(.3mm).zip]]
ABS profile for the Taz3 at %15 infill, supports enabled, .3mm layer height, extruder at 230C and bed at 90C, with appriopiate cooling.
ABS profile for the Taz3 at %15 infill, supports enabled, .3mm layer height, extruder at 230C and bed at 90C, with appropriate cooling (none).
==== PLA for Simplify3D ====
==== PLA for Simplify3D ====
[[File:PLA_Simplify3D.zip]]
[[File:PLA_Simplify3D.zip]]
PLA profile for the Taz3 at %15 infill, supports enabled, .3mm layer height, extruder at 190C and bed at 65C, with appriopiate cooling.
PLA profile for the Taz3 at %15 infill, supports enabled, .3mm layer height, extruder at 190C and bed at 65C, with appropriate cooling (increasing speed with layer height).
==== Ninjaflex for Simplify3D ====
==== Ninjaflex for Simplify3D ====
[[File:Ninjaflex_Simplify3D.zip]]
[[File:Ninjaflex_Simplify3D.zip]]
Ninjaflex profile for the Taz3 at %15 infill, supports enabled, .3mm layer height, extruder at 220C and bed nonheated, with appriopiate cooling.
Ninjaflex profile for the Taz3 at %15 infill, supports enabled, .3mm layer height, extruder at 220C and bed nonheated.
*Ninjaflex can only be run with the flexistruder extruder type, which requires the firmware "Marlin 2014" or older.