These notes are for reference after authorization by a person.
These notes are for reference after authorization by a person.
−
Only use drills and accessories with correct shank taper and tang
+
The spindle switch must be 'off' and the e-stop (big red button) must be in the out position (twist the button counter clockwise) before the spindle can be turned on.
−
−
Be sure the e-stop (big red button) is in the out position by twisting the button counter clockwise. This must be done before turning on the power, otherwise the spindle will not operate.
Authorizations from the old DoAll drill press carry over to this machine.
Authorizations from the old DoAll drill press carry over to this machine.